ESD Table Mat
Anti Static Mat RollAnti Static Mat Roll
Standard Size:1m*10m,1.2m*10m or OEM
Color:Green,Grey,Blue,Black,Brown or OEM
Customized Size Available Anti Static Mat Roll
1.Anti-static mat roll technical data
ESD rubber sheet
Place of Origin
Jiangsu, China (Mainland)
1000 rolls per Month
A container within 15 days
2.Application for esd mat
In the micro-electronics industry, such as electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits, the production workshops and advanced laboratories need to lay anti-static mats or conductive mats to reduce or eliminate static hazards. After the pad is laid and grounded, the working surface will discharge the static electricity of the human body, so that the ESD tweezers, tools, instruments, instruments, etc. that the human body and the table are in contact reach a substantially uniform potential, so that the electrostatic sensitive device (SSD) is not subject to frictional electrification, etc. The interference of the wide step band generated by the electrostatic discharge phenomenon achieves the effect of electrostatic protection.
3.Anti static mat roll picture show
4.SGS and CE Certificates
1)What's the recautions when using anti-static mat?
The surface of the product is strictly prohibited from contact with acid-alkaline solvents (such as benzene, alcohol, etc.), which may cause discoloration, fading and resistance loss on the surface of the product. If cleaning is required, the cloth may be wiped with a neutral solution (such as water).
The glue used should be compatible with the bottom of the table mat product and the workbench material. It is not only firmly bonded, but also does not shrink after the product sticks. It is recommended that the test be pasted before mass production.
Product shrinkage: The product contains more glue than the general table mat, the durability increases, and the tensile strength increases accordingly. It is recommended that the product specifications be relaxed and relaxed during the cutting, and stored for 24 hours, so that the product has a fatigue recovery process, and then Glue bonding production.
7.Factory production for anti static matting
Film covered on one sides+ plastic tube+Cartons+Pallets
If Pallet Size 1m x 1.2m ,Mat size in 1.0m x 10m x 2mm,30Rolls / Pallet.
If Pallet Size 1m x 1.2m ,Mat size in 1.2m x 10m x 2mm,30Rolls / Pallet.