ESD Table Mat
ESD Anti Static MatESD Anti static mat
Color:Blue,Green,Grey,or any customized
Surface Resistance:10e6-109 ohm.
ESD anti static mat
1.ESD anti static mat specification
Anti-static mat, also known as esd table mat, anti-static rubber sheet, anti-static rubber mat and so on. Anti-static bench mat is mainly made of antistatic (conductive) static material and dissipative electrostatic material synthetic rubber. Commonly used is a 2mm double-layer composite structure with a surface layer of about 0.5mm thick dissipative static layer and a bottom layer of about 1.5mm thick conductive layer.
Color:Dull/Shiny green,Dull/Shiny grey,Dull/Shiny green,Dull/Shiny blue, Dull/Shiny black.
Standard size:1m*10m.1.2m*10m,0.6m*10m,0.5m*10m etc.
Surface resistance: 106-109Ω
Bottom resistance: 103-105Ω
Volume resistance: 105-108Ω
Wear rate: 0.02g/cm2
Electrostatic removal time: < 0.1s
Customized Size and Color: Acceptable.
Ready stocks available or not:Yes
Heat Resistance:300 degrees
We're manufactured this esd mat by our own FACTORY!!!
We both have No smell esd mat high quality NO SMELL type and Slight LOW SMELL type esd mat.
2. Usage of Anti static bench mat
Lay ESD Anti static mat on the working bench table, Place a button on the surface of the esd mat. Connect the other end to the ground conductor. Discharge the static electricity collected on the desk through the anti-static grounding cable. .
With the constant emergence of various types of precision electronics, it is evident that the sensitivity of ESD is getting higher and higher. Controlling the generation and elimination of static electricity has become an important task in the manufacturing of related products. Although we can now use some anti-static materials, such as anti-static mats, we can effectively control the static electricity generation and electrostatic discharge of work surfaces. However, many work environments are not matched and imperfect measures will reduce the effect of anti-static electricity and bring great risks to production safety.
3.Why should I use the grounding wire for the anti-static mat?
When the anti-static mat is grounded, it needs to be connected to the anti-static grounding cord. However, some enterprises do not have real anti-static grounding for cost considerations, but connect the equipment grounding wire to a certain three-phase circuit. Go to the ground! It is recommended that everyone grounded must be connected to an anti-static dedicated ground. Why do you say this? Because different grounding wires have different functions, it is better to use anti-static grounding wires if you think about anti-static, because they have ground wires, lightning protection ground wires, lighting ground wires, etc. The balance point, which is different from our actual anti-static, will form a voltage drift, or zero drift, in fact, there is no real grounding, so the anti-static mat must be connected to the anti-static grounding Go online, in order to ensure that the quality of anti-static products will not be problematic, and the static electricity will be well discharged.
Anti-static grounding cord for the mat: It is equipped with claw-type metal clasp for easy installation on the mat. The other end of the grounding cable is equipped with a banana plug and an alligator clip for easy insertion into the grounding socket and directly clamping the grounding wire.
4.ESD Anti static mat detailed images
5. SGS and ROHS and CE Certificates
6. Payment Terms
7.ESD Anti static mat Packing & Shipping