Safety Working Technology (Shenzhen) Co.,Limited


ESD Table Mat

ESD Mat For Repair Work

ESD Mat For Repair Work
Standard Size:1m*10m,1.2m*10m or OEM
Color:Green,Grey,Blue,Black or OEM
Chat Now

ESD Mat For Repair Work

1.Antistatic mat specification

●The material of the esd mat is mainly made of conductive material and antistatic material and synthetic rubber which dissipates static electricity. The surface layer is conventionally 0.5MM, the bottom layer is 1.5MM, and the total thickness can be made into 2MM, 3MM, etc. . The mat is used for a long time, has good acid and alkali resistance, and is easy to clean.

●Color:Dull/Shiny green,Dull/Shiny grey,Dull/Shiny green,Dull/Shiny blue, Dull/Shiny black.

●Standard size:1m*10m.1.2m*10m,0.6m*10m,0.5m*10m etc.

●Customized size: Acceptable.

●Customized color:Acceptable.

●Surface resistance: 10e6-10e9Ω

●Bottom resistance: 10e3-10e5Ω

●Volume resistance: 10e5-10e8Ω

●Wear rate: 0.02g/cm2

●Electrostatic removal time: < 0.1s

●Ready stocks available or not:Yes

●Heat Resistance:300 degrees

●Elongation at break: 188%

●Tensile strength: 3.6MPA

●Tear strength: 20.6KN/M

●Resilience: 14%

●Impact catalytic temperature -250C: no damage

●Compression permanent rate of change Compression 25%: 17.9

2.Application for esd matesd mat.jpg

The normal use of the ESD mat for repair work can ensure that the electronic products are protected from static electricity, because the anti-static mat is an indispensable grounding tool for the operation of electronic products. The anti-static table mat is made of a conductive material, a static dissipative material and various rubbers through a special process. The whole is divided into two layers, the surface layer is static dissipative enthalpy, and the bottom layer is conductive layer. The anti-static mat has good wear resistance and chemical flux resistance, and has a long service life. Its main component is conductive material, static dissipative material, etc. It has certain anti-acid and anti-chemical solvent properties, and is easy to wear and wear, so it can ensure the life of anti-static mat.

Because of the development of electronic products, the demand for anti-static mats is also very large. The use of anti-static mats can not only reduce the production cost of manufacturers, but also save production resources and avoid waste of resources and The environment causes certain pollution.

3.ESD Mat For Repairing working principle

Anti-static table mat (table mat) on the green/blue/grey under the black, double-layer composite structure. The intermediate mesh structure is adopted, which has the advantages of good electrostatic discharge and fast discharge. It is made of antistatic material and dissipative static material synthetic rubber glue. Its main working principle is:

1. The green surface is for storing and absorbing static electricity around the table top, and the resistance is 107~109 Ωcm;

2, the black bottom is a conductor, the resistivity is ≤ 106 Ωcm, because it is a conductor, it can quickly discharge the absorbed static electricity;

3. One end of the grounding wire is connected to the anti-static mat and the other end is connected to the ground. Therefore, static electricity is smoothly discharged to the earth through the grounding wire. This will discharge the static electricity around the desktop through this principle.

4.ESD Mat For Repair Work detailed images

esd mat roll.jpg

esd green mat.jpg

anti-static green mat.jpg

5. Certificates for Antistatic bench mat 

ESD green mat1062.png


TT(Telegraphic Transfer),Western Union,Paypal,or monthly statement.

esd products payment.jpg


1) Are there any bad smells on you mat?

 We have both no smell and slight smell esd rubber mat for your choose.But all no heavy bad smells.

2)How long have you manufacturing and exporting esd products?

More than 10 years.We have our own factory producing esd mat,esd pvc curtain,esd stationery!

3)Why Choose Us?  

1, We are the leading manufacturer and exporter of various ESD & Clean room products

2, Honest but competitive price and Quality assured quotation 

3, 100% QC inspection before shipment 

8.Packing Way

Film covered on one sides+ plastic tube+Cartons+Pallets
Pallets Size: 1m x 1m,1m x 1.2m x 0.8m x 1.2m, 
Plastic Tube (Core) size: Diameter 50-100mm
Carton Type: Neutral Carton , Standard Designed Carton, or Customized Carton

9.Packing Way

If Pallet Size 1m x 1.2m ,Mat size in 1.0m x 10m x 2mm,30Rolls / Pallet,
500Rolls in 20feet container if all rolls with pallets
800Rolls in 20feet container if without pallets
850Rolls in 40feet container if all rolls with Pallets
If Pallet Size 1m x 1.2m ,Mat size in 1.2m x 10m x 2mm,30Rolls / Pallet,
500Rolls in 20feet container if all rolls with pallets
800Rolls in 20feet container if without pallets
850Rolls in 40feet container if all rolls with Pallets

esd rubber mat.JPGesd mat on truck.JPG

Hot Tags: esd mat for repair work, China, suppliers, wholesale, cheap, price
Related Products