ESD Table Mat
ESD Mats For ElectronicsESD mats for electronics
Size:1m*10m,1.2m*10m,and Customized size acceptable
Color:Green,Grey,Blue and Customized color acceptable
ESD mats for electronics
1.ESD mats for electronics specification
ESD rubber table mat, also known as esd table mat, esd desk mat,esd mat roll,esd rubber mat and so on. Anti-static bench mat is mainly made of antistatic (conductive) static material and dissipative electrostatic material synthetic rubber. Commonly used is a 2mm double-layer composite structure with a surface layer of about 0.5mm thick dissipative static layer and a bottom layer of about 1.5mm thick conductive layer.
●Color:Dull/Shiny green,Dull/Shiny grey,Dull/Shiny green,Dull/Shiny blue, Dull/Shiny black.
●Standard size:1m*10m.1.2m*10m,0.6m*10m,0.5m*10m etc.
●Customized size: Acceptable.
●Surface resistance: 106-109Ω
●Bottom resistance: 103-105Ω
●Volume resistance: 105-108Ω
●Wear rate: 0.02g/cm2
●Electrostatic removal time: < 0.1s
●Ready stocks available or not:Yes
●Heat Resistance:300 degrees
2.Application for ESD mats
Electronic devices, electronic computers, electronic communications equipment, integrated circuits and other microelectronics production workshops and advanced laboratories are required to lay anti-static mats or conductive mats in order to reduce or eliminate static electricity hazards. After the mat is laid and grounded, the work surface will discharge static electricity from the human body, so that the ESD tweezers, tools, instruments, and meters that the human body touches the tabletop reach a substantially uniform potential, making the electrostatic sensitive device (SSD) free from frictional electrification, etc. The effect of electrostatic discharge is caused by the interference of the wide-step surface band caused by the electrostatic discharge.
3.ESD mats for electronics laying method:
Lay an ESD mats for electronics on the desktop, and then apply a button on the surface of the anti-static grounding wire to the surface, and connect the other end to the ground conductor. This will discharge the static electricity collected on the desktop through the anti-static grounding wire.
1, the green surface for the storage and absorption of static around the desktop, its resistance 107 --- 109 Ωcm;
2, the black bottom is a conductor ≤ 106Ωcm, because the conductor can quickly discharge the absorbed static;
3. One end of the grounding wire is connected to the anti-static table pad, and the other end is connected to the earth. Therefore, the static electricity is smoothly discharged to the earth through the connecting wire. This discharges static electricity around the desktop through this principle.
4.ESD mats for electronics detailed images
5. Certificates of ESD mats for electronics
6.Payment & Delivery
Lead time:7-10 days for bulk order,1-3 days for small order.