ESD Table Mat
ESD Work Table MatESD work table mat
Standard Size:1m*10m,1.2m*10m or OEM
Color:Green,Grey,Blue or OEM
ESD work table mat
1.ESD working mat specification
●Anti-static bench mat, also known as esd table mat, anti-static rubber sheet, esd work mat and so on. Anti-static mats are mainly made of a variety of processes using conductive materials, static dissipative materials and synthetic rubber. The product is divided into two layers, the surface layer is an antistatic dissipative layer, and the bottom layer is a conductive layer. A static dissipative layer having a surface layer thickness of about 0.3-0.5 mm, a surface layer resistance of 10 to the power of 7 to 10, a power of 9 for the conventional color; a conductive layer having a thickness of about 1.5 to 1.7 mm. Layer, the bottom resistance is 10 to the power of 3 to 10, the color is black. The length is uniform to 10 meters, the width is conventionally 1m, 1.2 m, the thickness is conventionally 2 mm and 3 mm, and the width can also be cut according to requirements.
●Color:Dull/Shiny green,Dull/Shiny grey,Dull/Shiny green,Dull/Shiny blue, Dull/Shiny black.
●Standard size:1m*10m.1.2m*10m,0.6m*10m,0.5m*10m etc.
●Customized size: Acceptable.
●Surface resistance: 10e6-10e9Ω
●Bottom resistance: 10e3-10e5Ω
●Volume resistance: 10e5-10e8Ω
●Wear rate: 0.02g/cm2
●Electrostatic removal time: < 0.1s
●Ready stocks available or not:Yes
●Heat Resistance:300 degrees
2.Application for esd work table mat
1)Anti-static working mats are mainly used in the production and processing of electronic products. Because the electronic products are quite fragile during the re-manufacturing process, they will be damaged by static electricity when they are not careful, which will cause the products to lose their original functions and become pseudo-products. This will have a certain impact on the reputation of the business.
2)Anti-static work mat are widely used in the production workshops and advanced laboratories of microelectronics industries such as desk tops, assembly line counters, shelves, electronic semiconductor devices, electronic computers, electronic communication equipment and integrated circuits. The purpose is to make the electrostatic discharge sensitive devices that contact the human body and the table top, such as tweezers, tools, instruments, instruments, etc. reach a uniform potential and release static electricity, and at the same time, the electrostatic sensitive device is not interfered by electrostatic discharge phenomena such as frictional electrification, thereby achieving The effect of static electricity protection.
3)In the production workshops and advanced laboratories of the microelectronics industry, such as electronic semiconductor companies, electronic computers, electronic communication equipment and integrated circuits, in order to prevent the damage of static electricity to machines and finished products, anti-static mats should be laid to make the human body and the table top contact. Appliances, instruments, etc. all reach the same potential standard and release static electricity, while the electrostatic sensitive device does not rub against the table mat, thus achieving the effect of electrostatic protection, and has good acid, alkali and chemical resistance properties. And wear-resistant, easy to clean and maintain, the service life is not less than 2 years.
3.How to lay anti-static table mats？
When using the anti-static mat, put the mat black down, and lay it on the desktop to connect the ground wire. If there is no special ground wire, it can be directly connected to the ground; the operator wears the anti-static wrist strap and fixes it on the anti-static table. On the pad, the static electricity generated by the human body is released; the surface of the table mat is strictly prohibited from contacting the strong acid and alkaline solvent, which may cause the surface of the product to fade and the resistance value to decline. If you need to clean, you can wipe it with a rag and a neutral solution such as water.
4.ESD work table mat detailed images
5. Certificates for esd mat roll
TT（Telegraphic Transfer),Western Union,Paypal.
7.Packing information for ESD work table mat
Lead time:7-10 days for bulk order,1-3 days for small order.