ESD Test Meters
SL-031 Floor Multi-Functional TesterFloor Multi-Functional Tester
Application:for foot wear and wrist strap
SL-031 Floor Multi-Functional Tester
1.ESD Multi-Functional Tester Technical Parameters
|Name:DR.SCHNEIDER PC SL-031 Floor Multi-Functional Tester|
|Shoe cover test margin||750KΩ-100MΩ|
|Wrist cover test margin||750KΩ-10MΩ|
|Resistence Tolerance||( ± 20%)|
|Foot||≤740 KΩ||Red(Fail Lo)|
|≥110 MΩ||Red(Fail Hi)|
|Wrist||≤740 KΩ||Red(Fail Lo)|
|≥11.5 MΩ||Red(Fail Hi)|
One power adapter (9V-1000mA), three sets of bracket mounting screws M8x30mm, two sets of instrument fixing screws M3x15mm, two bracket lifting lock buttons, one manual, one calibration report and one warranty card.
2.Features of ESD Multi-Functional Tester
1. This product can quickly test ESD equipment, and three independent devices (left shoe, right shoe, wrist band) complete ESD detection at one time.
2. Three different status displays, LO (below the set value), PASS (within the set value range), and HI (higher than the set value) have alarm function.
3. Under-power indication, when the BATTERY Lw light is on, remind the user to charge in time! Otherwise the accuracy of the test parameters decreases. (preferably use power adapter AC or DC12V)
4. According to the customer's requirements for the operation of the access control system, an extended remote access control system can be developed.
1.Turn the battery switch to the ON position before use. If the display is not normal or the buzzer sounds long, it indicates that the battery in the machine is under power. Please plug in the power adapter to charge and start the machine directly. The static DC current is 12V/40mA.
2.ESD test, as long as the feet are stepped on the opposite metal pedal, wear the wrist strap into the wrist connection, and gently press the metal test button to see if the ESD equipment is qualified. Note: Do not wear gloves or use your nails to press the metal test button
1. Pass the bottom of the wiring bracket on the pedal out of the top.
2, three sets of M8x30mm will fix the bracket and the pedal.
3. Insert the wiring into the opposite patch cord at the bottom of the instrument.
4. Fix the relative positions of the two sets of instrument fixing screws M3x15mm.
5, the bracket lift lock button two locking bracket height.
Do not charge more than 8 hours! It is strictly forbidden to disassemble the machine for repair! The stand should be placed on a dry floor. Keep the pedals clean and dry.
5.Floor Multi-Functional Tester images
6. Payment Terms for esd wrist strap tester.
TT,Western Union,Paypal,Monthly close(Only for regular clients).
7.Packing & Shipping for wrist strap tester
1 set/carton,Carton size:40*30*40CM; Gross weight:7kgs per carton.
Small order:By DHL,FEDEX OR UPS EXPRESS.
Large order:By ship.