esd mat roll

1.esd mat roll specification

●Anti-static bench mat, also known as esd table mat, anti-static rubber sheet, anti-static rubber mat and so on. Anti-static bench mat is mainly made of antistatic (conductive) static material and dissipative electrostatic material synthetic rubber. Commonly used is a 2mm double-layer composite structure with a surface layer of about 0.5mm thick dissipative static layer and a bottom layer of about 1.5mm thick conductive layer.

●Color:Dull/Shiny green,Dull/Shiny grey,Dull/Shiny green,Dull/Shiny blue, Dull/Shiny black.

●Standard size:1m*10m.1.2m*10m,0.6m*10m,0.5m*10m etc.

●Customized size: Acceptable.

●Customized color:Acceptable.

●Surface resistance: 10e6-10e9Ω

●Bottom resistance: 10e3-10e5Ω

●Volume resistance: 10e5-10e8Ω

●Wear rate: 0.02g/cm2

●Electrostatic removal time: < 0.1s

●Ready stocks available or not:Yes

●Heat Resistance:300 degrees

2.Application for esd mat roll

esd mat.jpg

Electronic devices, electronic computers, electronic communications equipment, integrated circuits and other microelectronics production workshops and advanced laboratories are required to lay anti-static mats or conductive mats in order to reduce or eliminate static electricity hazards. After the mat is laid and grounded, the work surface will discharge static electricity from the human body, so that the ESD tweezers, tools, instruments, and meters that the human body touches the tabletop reach a substantially uniform potential, making the electrostatic sensitive device (SSD) free from frictional electrification, etc. The effect of electrostatic discharge is caused by the interference of the wide-step surface band caused by the electrostatic discharge.

3.What kind of environment is the esd mat roll used?

Anti-static mat This electrostatic protection material, in addition to the excellent performance of its own material, we also need to do some other matching, in order to truly achieve the purpose of electrostatic protection. One of them is grounding. After the anti-static mat is actually laid, the anti-static mat is connected to the grounding wire to realize the grounding release of static electricity to avoid the release hazard caused by excessive accumulation of static electricity. Everyone knows that the harm of static electricity to electronic products is mainly caused by the discharge of static electricity after voltage difference, voltage breakdown, the generation of static sparks, etc. are all the result and phenomenon caused by the partial release of static electricity. . Therefore, grounding this type of antistatic material is an important aspect of its use environment.

Humidity and temperature control in the production environment is also an important aspect of ESD protection. Generally, we recommend that the relative humidity is controlled at 45% to 75%, and the temperature control between 20 and 30 degrees Celsius is more conducive to reducing the danger of electrostatic discharge. If the product materials have special requirements on the ambient temperature and humidity, the corresponding local environmental assurance measures should be taken according to the needs and actual conditions. In addition, strict anti-static management measures and implementation are necessary conditions for anti-static effect assurance. Any negligence or neglect of control or control is not a source of artificial electrostatic hazards.

In summary, in the use of anti-static materials such as anti-static mats, ensure grounding, ensure environmental humidity and temperature, and strictly implement anti-static control measures. The matching and implementation of such use environments directly affects the prevention. The overall effect of static electricity.

4.esd mat roll detailed images

esd mat grey.jpg