Soft U Shape ESD Page Protector

1.Specifications

Material composition:ESD PP

Single layer thickness: 0.08mm

Dimensions: A4 (305mm*235mm), A3 (435mm*305mm)

Static decay time: 1000V-100V less than 1.0S

Surface resistivity: 10e6Ω~<10e9 Ω

Friction voltage: less than 100V

11 holes esd document holder

2.Permanent proof of ESD page protector

We now come to popularize some knowledge of anti-static paper bags: anti-static paper bag which is made of high-transparency anti-static PP substrate, thickness: 8C, converted to mm: 0.08mm, 11 holes on the left side There are printed anti-static marks and production date at the edge of the hole. The surface resistance is 10E7-10E11 ohms. The surface friction voltage is less than 100V. It is widely used in static sensitive areas and can be used to purify the environment (microelectronics, biology, medical Etc.), or for the purpose of loading electronic product shipping instructions.

The predecessor of the anti-static paper bag is made of plastic film. The anti-static particle material added in a certain proportion is produced by the blow molding process after being mixed with high temperature and common plastic materials, and blown into a roll of enamel. The film sheet and the sheet are mechanically cut into small pieces and heat-sealed to form individual anti-static bags. The anti-static bag can be called: permanent anti-static function.

3.Anti-static document holder detection method

The easiest way to do this is with two instruments. 1, surface resistance tester, 2, friction voltage tester

A true anti-static document bag, which is added with anti-static material to blow the film during the production process, and then shear-molded. The most important surface will be printed with anti-static LOGO, which is the symbol of the hand. Secondly, the color on the side of the perforation should be yellow, and the most important step is to use the instrument to detect it.

Surface resistance tester to detect its surface electrostatic effect, generally within 10E7-10E10 power, this instrument is best precision, US ACL380, ACL800 and so on.

Friction voltage tester, no matter what is not anti-static, as long as the instrument is used for testing, the voltage of the product after rubbing exceeds 100V, it is not a qualified anti-static product, of course, it depends on the industry of your product. The test standard, or the requirement is not high, will be within 200V. (Recommended instruments are: SIMCO FMX-003, US ACL-350, etc.)

Every step of time is improved. If it is a truly permanent anti-static bag, the more stable it is, the more stable it is.

4.Pictures of ESD Page Protector

Anti-static holder.jpg