Antistatic Test Meter

Antistatic test meter

<1>. Function operation

The SL-030B Antistatic test meter has a battery voltage undervoltage indication function. The power supply mode of the temperature and humidity module is independent of the power supply mode of the resistance test. The temperature and humidity of the battery consumes a small amount of electricity. It will be used for two years and will not be lost due to the action of the switch.

<2>. Product Features

1. When the battery voltage is lower than 5 volts, the LWBATTERY indicator flashes.

2, with temperature and humidity digital display

3. A multi-function measuring instrument that measures ambient humidity, temperature and surface resistance.

<3>.Technical parameters

<4>. Product introduction

The SL-030B surface resistance tester (also known as the heavy hammer surface resistance tester) measures the surface resistance of an object to detect the antistatic ability of the object. The SL-030B surface resistance tester complies with the ASTM standard D-257 test method. When testing, just place two weights on the surface of the object to be measured and press the red button. The instrument will display the specific resistance value of the surface of the object.

SL-030B heavy hammer surface resistance tester is a precise instrument for testing the surface resistance of objects. It can be displayed with LEDs from 103~1012.

At the same time, it can provide the temperature and humidity of the environment you are testing - from the LCD screen. There are conductive adhesives under the two weights to make the test more accurate.

<5>. Instructions for use

Place the two weights on the surface of the object and keep them clean. Adjust the spacing between the two weights to ensure that the two wires between the weight and the instrument are connected.

Then turn on the temperature and humidity switch in the lower right corner of the instrument, about two seconds after the temperature and humidity display is normal. At this point, press and hold the red button in the middle of the instrument, the instrument enters the positive

Often tested, the test results will be displayed on the instrument's LED lights, after confirming the test, release the hand is OK.

<6>. Precautions

1. The distance between the two weights of the test object surface is normally within 30 cm;

2. After each test is completed, please shut down in time to avoid wasting the battery;

3. It is forbidden to touch the metal parts of the two weights by hand during the test;

4. When the LWBATTERY lamp flashes red, please replace the battery immediately.

<7>. Features

·Measure impedance, temperature and humidity, in accordance with ESD standards, S4.1, S7.1 and S11.11

· 103-1012 ohms / □ range, can test the electrical properties of various materials.

·10 volt / 100 volt measurement scale for standard work surfaces and floors.

·Plastic instrument protection box to prevent damage to the instrument

· Light weight, only 150Z (425g), easy to carry

· LCD digital display, easy to use, easy to read

·Automatic power off function to extend battery life

·Automatic zero return to ensure accuracy

Parallel electrode, 5-pound probe and built-in impedance probe, all comply with ASTM, EOS and CECC standards

·NIST tracking, ISO9000 guarantee

· Replaceable probe for extended life

· 9V DC or NiCd rechargeable battery or AC transformer, common in the US and overseas.

<10>payment and delivery

Hot Tags: antistatic test meter, China, suppliers, wholesale, cheap, price