Portable Mini Air Ionizer

Operating Voltage:110V/60Hz or 220V/50Hz
model:ST101BN
Current Consumption:0.08A or0.04A
Operating Temperature:0℃-50℃
Air velocity:45-70CFM
Size:100mm (L) ×55mm (W) ×137(H)mm(Without bracket)
Air Coverage:10cm×15cm×30cm
Weight:2.0kg
Offset Voltage:0v ~ ±10v

Send Inquiry

Portable Mini Air Ionizer

<1>.Portable Mini Air Ionizer Technical Parameters

Operating Voltage	110V/60Hz or 220V/50Hz
Current Consumption	0.08A or0.04A
Operating Temperature	0℃-50℃
Air velocity	45-70CFM
Size	100mm (L) ×55mm (W) ×137(H)mm(Without bracket)
Air Coverage	10cm×15cm×30cm
Weight	2.0kg
Offset Voltage	0v ~ ±10v

<2> Product introduction:

STMicroelectronics ST101BN desktop micro high frequency DC ion fan adopts international advanced closed loop control system, the circuit can be installed according to

The voltage on the sensing (iron mesh cover) of the fan outlet automatically controls the amount of positive and negative ions. By increasing the amount of positive and negative ions in the air to neutralize the static electricity on the surface of the object to be eliminated, the purpose of preventing and eliminating static electricity is achieved. . In addition to the static series of products, the human body design makes it easy to operate and easy to maintain. Can be used in precision electronic products, electronic assembly, medical systems

Manufacturing industry for assembly lines, printing, packaging and small product molding. Disadvantages: It is easy to be affected by external electromagnetic waves and pulses. Maintenance costs are higher than AC. There are many inspections.

<3>.Test Results

Portable Mini Air Ionizer.jpg

Portable Mini Air Ionizer picture.jpg

Portable Mini Air Ionizer Behind.jpg

Portable Mini Air Ionizer use.jpg

Brand portable mini air ionizer.jpg

<4>.Why is antistatic so important?

In today's society where technology is so developed, electronic products have become the protagonists, and almost everyone can't do without them. At the same time that electronic products are produced, the harm of static electricity is also generated accordingly. Therefore, anti-static protection is put on the agenda.

<5>.What is the danger of static electricity?

Electrostatic discharge occurs very quickly with high intensity, and usually generates a large amount of heat to melt the internal circuit of the semiconductor chip. Under the electron microscope, the external image is blown out of the small bullet hole, causing timely and irreversible damage. However, only one tenth of this hazard occurs in the final test, and more seriously, in the other 90% of cases, the damage of static electricity only causes partial degradation, which means that the damaged component can be Perceptively passing the test, and only premature field failures occur after the finished product is delivered to the customer. The result is the most detrimental, the most costly for a manufacturer to correct any manufacturing defects, and the economic loss will be quite large.

<6>.Payment and Delivery

Brand portable mini air ionizer Payment and delivery.jpg