Anti-static ankle strap experts teach you the most cost-effective electrostatic protection
Different electrostatic protection measures have different effects and application scopes. In order to effectively eliminate static electricity, it is necessary to select suitable electrostatic protection measures for your own enterprise. Anti-static ankle strap experts introduce you to the most cost-effective ESD protection measures:

First, electrostatic grounding
Connect some antistatic products to a ground wire. The ground wire is established by using a buried wire method. The resistance between the ground and the earth is <10Ω, which acts to discharge the charge on the conductor. The static electricity accumulated on the conductor is usually grounded by grounding. This method is economical and not only has a small investment but also has a long service life and can release static electricity.

Second, antistatic agent
Scrubbing the surface of the instrument and the object with a static eliminator can quickly eliminate static electricity on the surface of the object. The role of the antistatic agent is to adsorb the moisture in the air on the surface of objects such as chemical fiber, rubber, plastic, etc., and increase the electrical conductivity. This method can only eliminate static electricity locally, and has a short duration and is prone to failure.
Third, shielding
The most common method is to use an electrostatic shielding bag and an anti-static turnover box as a place to protect the static-sensitive components from static electricity during storage or transportation. The electrostatic shielding method can weaken the influence of external static electricity on the electronic components.
Fourth, control the environmental humidity
It can form a very thin water film on the surface of the object. The water film can dissolve carbon dioxide in the air, so that the surface resistivity is greatly reduced, and the static charge is not easy to accumulate. If the relative humidity drops to 40-50%, the static electricity is not easily dissipated, and it is possible to form a high potential. A common method of increasing the humidity of the air is to spray water into the air.
Five, static eliminator
The principle is to generate a large amount of positive and negative ions on the static eliminator, and then blow the ions to the static place by the wind. The static electricity will attract the ions of opposite polarity and neutralize it, and the static electricity accumulated on the surface of the product or equipment will Therefore, it is neutralized and eliminated. This method eliminates the static electricity speed and is high in cost, and the maintenance cost is also high when used for a long time.

