Anti-static ankle strap performance and precautions
1. The anti-static ankle strap is not allowed to be disconnected during operation, otherwise the grounding effect will be lost. The primary question for the use of various wristbands is the open circuit, sometimes temporary, sometimes disconnected for a long time, losing the grounding effect. Some people therefore use the wristband detector to measure their on-off status, and some use monitoring instruments to measure the open circuit and resistance of the wristband;
2. The wrist strap is not tight enough to make the contact resistance between human skin and wrist strap become larger;
3. Some self-proclaimed wireless wristbands are far less effective than wired ones;
4. Anti-static shoes should have anti-static socks/insoles when they are worn, and work on the anti-static ground to make the static electricity brought by the human body lead to the ground. Any excessive resistance or disconnection will cause harmful static electricity to the human body . Therefore, it is important to have a human body resistance tester to detect whether the total resistance of shoes/socks/insoles worn by the human body and the human body can play the role of static electricity leakage at any time;
5. The wrist strap uses a special ground wire with a socket to connect to the ground, and cannot be clamped on the metal body on the desk or table, because the resistance of these metal bodies to the ground can be very large;
6. The resistance of some wrist straps is the strap itself. When the strap touches the ground, its resistance is greatly reduced, which may pose a risk of electric shock to the human body;
7. Always check the resistance of the wristband.
The above is the performance and precautions of the anti-static ankle strap. When using it, care should be taken to ensure that the ankle strap is in contact with the skin and that the ground wire is directly grounded so that it can maximize its effectiveness.