The most correct installation method for anti-static grounding wire and anti-static mat
Customers who purchase anti-static grounding wire and anti-static mat can call the installation method. The correct grounding will directly affect the anti-static effect of the entire production workshop. Why should the anti-static grounding wire be used in the assembly line workshop? For the ESD safety station, the concept of grounding the grounding wire is to have all conductors at the same potential, thus minimizing the potential difference between the two conductors.
Since the power ground and the ground are always in the control zone, it is the most convenient connection point. If the antistatic wrist strap and the ESD mat are connected to the same grounding point, they have the same potential and are the correct mounting method. The anti-static wrist is first connected to the ESD mat, then through the mat, and then through the mat diagonally, and finally grounded, so that the mat has an additional series impedance (resistance or capacitance) to the ground, sometimes, the operator It can be at a different potential than a grounded desktop device or an ESD sensitive device located on a table mat. Grounding wire, 1M ohm resistor per socket; 0M ohm resistor; black and blue PVC insulation; 10 foot ground wire. Shenzhen Haiwei Dahang Technology Co., Ltd. specializes in providing anti-static wrist straps, grounding wires, etc. Shunteng purification anti-static consumables products. This is the star claw grounding wire quality quality assurance, welcome to buy! Mainly consists of star claws or buckle caps with lines and alligator clips.
The styles include PVC ground wire, PU ground wire, double hole ground wire and suction cup ground wire. There are many forms: suction cup + suction cup ground wire, suction cup + alligator clip ground wire, suction cup ground wire + terminal, screw + alligator clip ground wire. Can be customized as required. Anti-static grounding wire (suction cup + fish clip) This is the quality assurance of the star claw grounding wire, welcome to buy! It is mainly composed of star claws or buckle caps, slingshot lines and alligator clips. The styles include PVC ground wire, PU ground wire, double hole ground wire and suction cup ground wire.
There are many forms: suction cup + suction cup ground wire, suction cup + alligator clip ground wire, suction cup ground wire + terminal, screw + alligator clip ground wire. Can be customized according to the requirements, the specific method of installation is as follows: 1. Lay the anti-static mat on the workbench, install the anti-static grounding wire on the corner of the workbench; 2. Cut the anti-static mat to open a small mouth, use the grounding The star claw part of the line is inserted into it, and the star claw must be tightly fastened with the anti-static table pad; 3. The other end of the anti-static grounding wire is the anti-static grounding busbar for the squid clip; 4. Measure the anti-static grounding wire and prevent Whether the electrostatic table mat is connected to the earth, and the test passes, that is, the anti-static grounding device is basically completed.