Anti-static shoes, conductive shoes technical requirements
This standard is based on the "Safety Shoes, Protective Shoes, Work Shoes Specifications and Test Methods" (ISO/CD8782-1) drafted in 1993 by the International Standardization Organization Protective Equipment Standardization Technical Committee (TC94) Foot Protection Professional Committee (SC3). Anti-static shoes, conductive shoes requirements, national standard GB4385-84 "anti-static rubber sole shoes, conductive rubber soles safety technical conditions" and GB4386-84 "anti-static rubber sole shoes, conductive rubber soles resistance test method" Revised. The electrical performance and test methods of anti-static shoes and conductive shoes specified in this standard are in accordance with ISO/CD8782-I, 4.3.4 and 5.7. This is to meet the needs of international trade, technology and economic exchange.
When the GB4385-84 and GB4386-84 were revised according to ISO/CD8782, the physical and mechanical properties of the shoes were combined with the actual situation in China and proved feasible by practice, directly referring to the relevant standards of footwear in China.
This standard shall be implemented from March 1, 1996. All anti-static shoes and conductive shoes produced from May 1, 1996 shall comply with the provisions of this standard.
The revised standard version and the 84-year version have a big difference in content and structure:
The revised new version includes:
Foreword
1 Scope
2 Reference standard
3 Product Categories
4 Technical requirements and test methods
5 Inspection rules
6 Marking, packaging, transportation and storage
7 use
Appendix A Method for Measuring Resistance Value (Standard Appendix)
The 84-year version includes:
introduction
1 wearing place
2 Performance indicators
3 wear requirements
4 Electrical performance test of the sole
5 Quality Supervision
6 signs
This standard shall replace GB4385-84 and GB4386-84 from the effective date.
Appendix A of this standard is an appendix to the standard.
This standard was proposed by the Ministry of Labor of the People's Republic
This standard is under the jurisdiction of the National Technical Committee for Labor Protection Products Standardization.
This standard was drafted: The General Armament Equipment Research Institute of the Chinese People's Liberation Army.
The main drafters of this standard: Hu Changxing, Li Qinhua, Gan Gengchen, Wang Hongsheng.
1 Scope
This standard specifies the product classification, technical requirements and test requirements, inspection rules, marking, packaging, transportation, storage and use of anti-static shoes and conductive shoes.
This standard applies to all types of shoes with anti-static properties and electrical conductivity.
2 Reference standard
The provisions contained in the following standards constitute a standard provision by reference in this standard. At the time of publication, the editions indicated were valid. All standards will be revised and parties using this standard should explore the possibility of using the latest version of the following standards.
GB2829 cycle check counting sampling program and sampling table (for inspection of production process stability)
HG/T 2495 labor shoes
QB 1002～1005 leather shoes
3 Product Categories
3.1 anti-static shoes
a) anti-static leather shoes;
b) Anti-static cloth soles.
3.2 conductive shoes
a) conductive leather shoes;
b) Conductive cloth soles.