Can the anti-static mat be cut?
Anti-static mat is a kind of safety protection product, and at the same time, it is mainly used for laying on the ground. The coil specifications at the factory are often not tightly laid in some corners. It is necessary to cut the anti-static mat. The cutting method is also very Simple, just use a utility knife to cut along the line that needs to be cut at one time (try everything to the end, multiple cuts may cause burrs). But it should be noted that any piece of anti-static mat, regardless of size, whether it is spliced with other anti-static mats or not, should be in direct contact with the grounded copper foil net to ensure that the static electricity generated in any place can be discharged to the ground in the first time in.
We directly sell anti-static mats to the factory, and accept custom-shaped anti-static mats within 1.5mx1.2m length and width. In addition, color (except white, theoretically possible) and thickness (usually between 1mm and 5mm) are also customized service