Changing the load technology of the ion fan will affect the static control of the insulating material
In high-tech product manufacturing plants, controlling static electricity is the basis for improving production efficiency, improving quality, and increasing profits. In the production of semiconductors, hard disks, and flat panel displays (FPDs), static control is one of the basic production conditions. Failure to control static electricity means that the product is subject to particle contamination (ESA problems) and electrostatic discharge (ESD problems) due to electrostatic attraction.

Electrostatic control systems from organizations such as the American Electrostatic Association (ESDAssociation) and the International Semiconductor Equipment and Materials Association (Semiconductor Equipment and Materials International) can help companies solve static problems. The main technical method of these systems is to use static electricity conductive materials and static dissipative materials (including human body) to directly access the earth to dissipate static electricity.
Unfortunately, insulation is inevitably used both in the product itself and in the work environment. When the insulating material is part of the product itself, you can't replace it. For example, high-tech products use silicon wafers with oxide layers, epoxy resin for semiconductor device packages, insulating materials on device leads, and epoxy. Resin printed circuit boards, glass sheets in the FPDs industry, etc. In addition, it is suitable for special environments, such as high temperature, corrosion resistant and clean room compatible materials: Teflon, quartz and many plastic materials are insulating materials. Grounding does not eliminate the static charge on the insulating material. Therefore, in most cases, the only way is to use air ionization for electrostatic neutralization.

Although air ionization is recommended in most electrostatic control systems, they rarely document the use of air ionization and the effects of using ionization equipment in production. For many industries, the use of air ionization to control static is very important, and it is hoped that this article will provide some neglected information to users of air ionization.
Division of air ionization
The word "ion" (Ion) comes from the Greek language, originally a verb, meaning the action, and has the meaning of a traveler. The term used as a term is used to describe a reaction that reacts after energization of various solutions - a molecule that dissociates and moves toward the opposite electrode as itself. The theory of Swedish scholar S. A. Arrhenius believes that the moving ion is a charged atom, a theory that was confirmed after the electron was discovered.
An ion can be defined as an atom or molecule that loses electrons or acquires electrons. Electrons are the only carriers of charge transfer. When an atom or molecule has the same number of electrons and protons, its charge is balanced, or neutral. If an electron is lost, the atom or molecule carries a positive charge and becomes a positive ion, and the electrons become negative ions.

But this is not the case with air ions or charged air molecules. Air is a mixed gas composed of nitrogen, oxygen, carbon dioxide, water vapor, and other trace gases, one or several of which can be ionized. At some point, diatomic gas molecules such as nitrogen (N2) and oxygen (O2) can acquire or lose electrons, but at other times, chemical gases such as carbon dioxide (CO2) can do the same. In either case, when one or more gas molecules in the air acquire or lose electrons, we call it air ionization. Unlike solution ions, air ionization requires a certain amount of energy to form.
Typically, unfiltered air, the resulting air ions are in the form of clusters of gas molecules, and 10 neutral gas molecules are wrapped around a charged molecule. The charged molecule may be an oxygen molecule, a water molecule or a nitrogen molecule, which we call a small air ion here. Small air ions do relative motion, and after encountering oppositely charged ions or grounded surfaces, they lose their charge and return to neutral molecules. In clean air, the life of small air ions is between a few seconds and a few minutes.
Under appropriate conditions, these ions will adsorb on particles or large molecular groups in the air, forming large air ions. The relative proportion of small air ions to large air ions depends on the cleanliness of the air. A large amount of aerosol in the air consumes small air ions.
However, the static charge neutralization on the insulating material we talk about in electrostatic control is mainly based on small air ions.
Air conductance and charge neutralization
If an ion is exposed to an electric field, it will move due to the magnitude of the field strength and the direction of the electric field. The ions moving in the electric field are capable of forming a current. The current density depends on the number of ions in the air and the speed of movement relative to the electric field source. The current density is referred to as the conductance of the air for this electric field. This conductance will change due to positive and negative polarity.
An electric field is generated around a charged body, and the electric field strengths at different points are different, and the electric field drives the charge balance. If a charged body is surrounded by positive and negative air ions, ions of opposite polarity will move toward the charged body and generate current. This neutralized current balances the charge on the charged body with the conductance of the surrounding air. In short, the charged body attracts oppositely charged air ions.
An ion with an electric field strength of E will move at a rate of v, and the relationship between them is
v =kE, (1)
Where k is the ion and mobility.

