Dust removal is simple, just stick the dust pad
In our lives, we will always see doormats in shopping malls, restaurants, and even the entrances of homes. The doormat is a product that can effectively scrape off dust and water at the entrance and keep the indoor floor clean. It is flexible and soft, and the feet feel comfortable. The unique anti-ultraviolet additive prevents discoloration and embrittlement, and can withstand the outdoor environment of the sun and rain.
For a more advanced dust-free workshop, this degree of cleanliness is far from enough. The workshop staff’s daily workload is cumbersome and complicated, and it is also necessary to provide them with a clean and comfortable environment. Dust is a big problem for the workshop, and it is also harmful to the body if workers inhale dust for a long time. In clean rooms with high requirements for cleanliness, sticky mats came into being. We can choose sticky mat to make the workshop zero dust. The sticky mat is mainly suitable for sticking to the entrance or buffer zone where dust and purification spaces are needed. It can effectively remove the dust on the soles and wheels, minimize the impact of dust on the quality of the purification environment, and achieve simple dust removal. The effect of solving the problem of incomplete dust removal of other mats and the inability to protect the dust from spreading.
The sticky mat produced by our company is composed of 1 layer of non-adhesive PE base film + 29 layers of glued PE single-sided film + 1 layer of glued PE double-sided film. Each layer has 1-30# in the lower left or right corner Digital label (as shown below) for easy replacement. Each layer of the sticky mat is coated with a unique high-viscosity or low-viscosity adhesive viscosity size suitable for different places. The digital label facilitates the separation between the sheets, and the multi-layer, straight-edge sticky floor mat can quickly and effectively remove the dust carried by the wheels and soles of the transportation vehicles, keeping the environment clean. When in use, first remove the protective layer of the rubber surface from the opening on the back, and then put it flat on the clean and water-free access floor, and use the soles to flatten the sticky mat to the ground, then from the front Remove the protective layer from the opening so it can be used. If the surface of the film is covered with dust during use, tear off this layer from the opening, so that the next layer of clean film can be used again.