Electronic factory anti-static safety measures
First, use anti-static workbench
(1) The anti-static workbench is an essential part of the anti-static work area. It consists of a workbench, an anti-static table mat, a wristband joint, and a grounding wire.
(2) There should be no less than two wristband connectors on the anti-static table mat, one for the operator and the other for the technician, the inspector or other personnel.
(3) If necessary, an anti-static workbench should be equipped with an ion wind static eliminator.
(4) It is not allowed to stack plastic boxes (sheets), rubber, cardboard, glass, etc. that are prone to static electricity on the anti-static workbench. The drawings and materials should be placed in the anti-static paper bag.

2. Anti-static wrist straps should be worn with anti-static wrist straps. The wrist straps should have good contact with human skin. The wrist straps must be non-irritating and non-allergic to the human body. Should be in the range of 106-108 Ω.
Third, anti-static containers In the development and production process of electronic equipment, all storage and turnover SSD containers (component bags, transfer boxes, printed boards, component storage boxes, etc.) should have electrostatic protection. Metal and ordinary plastic containers are not allowed. When necessary, the tote box for the storage unit should be grounded.

4. The ion wind static eliminator eliminates the static charge on the surface of the insulating material and should be an ion wind static eliminator.
Five, anti-static overalls
6. Personnel entering the anti-static work area or contacting the SSD should wear anti-static overalls, and put a few points on your work clothes fabrics in accordance with GB 12014.

7. In an environment with a relative humidity greater than 50%, the anti-static overalls are allowed to use pure cotton products.
Eight, anti-static work shoes into the anti-static work area or contact SSD personnel should wear anti-static work shoes, anti-static work shoes should comply with the relevant provisions of GB4385. Normal shoes are generally allowed, but a conductive shoe bundle or heel strap should be used at the same time.
9. When the anti-static transport vehicle runs SSD or the whole parts containing SSD, the transport vehicle with anti-static performance should be used.

