Electrostatic control method for ion wind gun
The ion wind gun is a hand-held static eliminator that provides a powerful ion wind to the item. It is planned for high air volume dust removal and neutralization of static electricity. Ion Air Gun Describes the control of static electricity: The control skill of static electricity is to adopt an induction method to control the electrostatic damage within the allowable range in the case where the accumulation of electrostatic charge is unavoidable.
1. The technical control law is intended to generate as little static charge as possible during the production process. Preventive measures should be adopted for the selection of materials, equipment and operation management in the technical process to control the occurrence of static electricity and the collection of electric charges, and to minimize the damage according to the electrostatic potential and discharge energy.
2. The electrostatic screen drop method uses the grounded screen off cover to separate the charged body from other items, so that the electric field of the charged body will not affect other surrounding objects. This screen off method is called the internal field screen. Sometimes the grounded screen cover is used to surround the blocked object to protect the barrier from the external electric field. This screen is called the external field screen.
3. Composite neutralization and other methods of complex neutralization to achieve the elimination of static charge. Generally use static eliminators: ion wind guns, ion fans, ion wind horns, ion wind nozzles, ion wind drums, positive and negative ions to neutralize the charge of the charged body, and may make the exposed parts look more lubricious and the surrounding environment Clean and then reduce the possibility of tip discharge.
4. The intention of the leakage method is to make the static charge pass through the leakage to reach the elimination. Generally, electrostatic grounding is used to make the electric charge leak to the earth. Generally, the method of increasing the conductance of the material is used to make the static leakage.
5. Prevention is an important method or important equipment for you. This is the most important factor in the control of electrostatic discharge. Other people or you in the work of touching with electronic components need to be aware of the risks of electrostatic discharge, to understand them, and to be accustomed to them will be more important than any electrostatic release control information.