An electronic circuit board has tens of thousands of lines. These small lines are regularly arranged on the circuit board without affecting each other and leaving a gap. The operator will inevitably frictionally generate tens of thousands of electricity during operation. Volt static electricity, these electrostatic factors are similar to each other, and it is necessary to have some static electricity to get bigger and more concentrated by the gravity of the country. The wires thus break down the circuit, which may cause malfunction or calculation errors of the computer, poor perforation of the puncher, jamming of the printer, and the like, causing irreparable damage. Therefore, you must wear anti-static gloves when assembling these boards. The composite conductive wire of the anti-static gloves can transfer the generated static electricity along the conductive fibers to the anti-static clothing, and the anti-static clothing will transfer the static electricity to the earth, and the static electricity will be static. After exporting, the quality of the production is greatly improved and the cost is saved.
Anti-static gloves can be used repeatedly for repeated cleaning. Therefore, anti-static detection should be performed regularly. If it does not meet the static requirements, it should be stopped immediately to avoid useless work.