ESD protection is closely related to corporate interests

The electronic components in the manufacturing industry are damaged by static electricity. The main reason is the sensitivity of electronic components to static electricity. If there is a severe situation of high static voltage in the production environment, enterprises must face the detailed analysis of the effects of static electricity. The customer consultation to solve the static problem in the production environment is relatively high. When the audit factory fails to pass, it is recognized that there are many places where the static protection is not in place in the production workshop. Even some customers have not formed an electrostatic protection system solution. ESD protection has developed. Nowadays, there are still many static protection problems that have not been put in place. The development of electronic processing enterprises is inseparable from the quality of products, and the improvement of product quality is inseparable from static electricity protection.
The first thing to understand is how much static electricity affects electronic components. How many forms are there? How much scrap rate will the product bring? These are all issues that must be considered for ESD protection. Electrostatic discharge is invisible to the naked eye. It can capture the electrostatic discharge process. It depends on the attention of ESD engineers. ESD basically affects the entire electronics manufacturing field. Electronic manufacturers are unable to avoid ESD interference, which is the main reason for the high ESD protection work in electronics manufacturing.
The high-precision electronics manufacturing industry has been shouting for ESD protection. From the actual work, it is found that the current domestic electronics manufacturers still need to improve their ESD protection. It is necessary to do a deeper exploration to protect the quality of products. To enhance the corporate brand image, the technical mission of ESD protection is to solve the production and production site to reduce or eliminate the occurrence of static electricity, so that product safety is guaranteed.

At present, there is a problem of difficult ESD implementation. Enterprise executives shouted for ESD protection on the production line. Some departments of the company have continuously reduced the investment in static protection products from the perspective of cost reduction, especially the common phenomenon is: Protection products, when it comes to purchasing, will consider the price problem, buy some static protection products that can not achieve the effect, bring intangible losses to the enterprise, they do not seriously consider, only look at the immediate interests, often low-cost static protection products If the equipment is eliminated, good ESD protection cannot be achieved. The procurement personnel did not consider the value of the defective product due to the failure of ESD protection. ESD protection to achieve good protection to restore the value of unnecessary loss of production, whether it exceeds the investment of ESD protection, the management of each electronic manufacturer must take into account ESD protection issues, make decisions, analyze Whether ESD protection investment can achieve the expected benefits, reasonable investment and quality improvement are the development direction of the enterprise.
Any electronic manufacturing company may encounter ESD risks in the production process. Every process in the electronics manufacturing industry may have problems. Specific problems should be thoroughly investigated. Electronic manufacturing companies need to understand that ESD will cause failure threats to electronic components. Efforts to implement ESD protection system solutions, it is recommended to use electrostatic event detectors, ESD event detection, detect CDM, HBM, MM ESD events, have the ability to distinguish signals, distinguish between EMI and ESD signals, and eliminate ESD-related Events, testing the number of ESD discharges and discharge voltages can help you analyze the problem and reduce the damage caused by ESD.
The ESD event analysis should be carried out in all aspects of the production environment of the electronics manufacturing industry. The analysis of the problem must be based on accurate instrument measurement, targeted troubleshooting, ESD failure in the production process, and full production process ESD must be applied to the production line. Risk survey and analysis can find the production location and ESD risk indicator parameters that the production line actually causes ESD to fail. It is not an easy task to find relatively valuable parameters. At the same time, it must also have a qualified technical engineering. By understanding the ESD sensitivity of electronic components, the production process requirements and the period have effective ESD risk and ESD failure assessment. Analytical ability requires long-term technical engineers who have accumulated a lot of practical experience in this field.

If ESD protection work is not taken seriously, many problems can occur. The product is ineffective due to electrostatic damage, and it may be discovered. The electrostatic spark explosion may make it impossible for everyone to predict. There was a dust explosion incident in the factory. Enterprises have caused serious losses. It can be seen that ESD protection does not see results on the surface, but in fact it supports the development and growth of enterprises. In the electronics manufacturing industry, all enterprises that attach importance to ESD protection system engineering can get good development. The profitable return on business is also considerable.

