Hospital sticky mats are used at the entrance of the operating room and in the buffer zone.
1. Usage: 1. When using the sticky mat, first tear off the protective layer of the rubber surface from the opening on the back, then stick it flat on a clean and water-free floor, and use the sole of the shoe to flatten the sticky mat on the ground, and then tear off the protective layer from the opening on the front; 2. When a layer of sticky mat mucous membrane is full of dirt, peel it off and use a new layer of mucous membrane underneath, so there is no need to clean and wash; 3. Anti-slip and pollution-free, it will not be damaged by shoes or wheels, and it is easy to remove without leaving traces.
2. Advantages: 1. It can effectively remove dust from the soles and wheels, minimize the impact of dust on the quality of the purified environment, and solve the problem that ordinary floor mats cannot completely remove dust and cannot ensure that dust does not spread;
2. The sticky mat can not only remove dust alone, but also remove dust from manual silicone wheels, ensuring the recycling of silicone wheels. The glue polymer molecules on the paper surface are high-density and can absorb fine particles;
3. The surface of the sticky mat does not debond after strong friction, the glue density is evenly distributed, and the glue is environmentally friendly and has no odor;
4. For easy tearing during use, page number labels are attached to the corners of the sticky mat. It is a reusable dust removal mat that can remove dirt from tires. It is just the weight of the vehicle passing through. The dirt on the mat can be simply removed by wiping, and it will not produce any additional garbage because you can use it repeatedly.
After the hospital sticky mat has been used for a period of time, the surface film layer will be contaminated, and at this time, the surface film layer needs to be torn off. Many people start from the corner with the label and tear it off diagonally. Doing so can easily cause pollutants attached to the sticky mat to fly up and enter the clean room through air flow. We recommend that you use the following steps to tear off the film layer to be replaced:
1. Find the color label on the edge of the mat;
2. Pick up the label and slowly peel off the film layer from the edge of the mat;
3. Continue to peel the film upwards to separate it from the mat until all four corners are separated from the mat;
4. Pull the four separated corners to the middle of the mat to form a tent shape;
5. Slowly separate the film in the middle of the mat;
6. Fold the film inward until it is small enough to be discarded.
7. The contaminated film should be thrown outside the locker room. Staff should not tear off the label or tear off the film from the mat at will, but should follow the above steps to slowly tear off the film. When the film surface is covered with dust during use, the viscosity of the sticky mat will decrease. At this time, it is necessary to tear off this layer of the sticky mat. It is also important to tear off the sticky mat. First, slowly separate the four corners of the dust pad from the pad, then move closer to the middle, wrap the dust inside, and fold the film inward until it is small enough to be discarded. In this way, the pollutants attached to the dust pad will not fly around to ensure the dust removal effect. The sticky dust pad has strong adhesion and does not fall off. It can be used more than 100 times, is easy to replace, does not require mopping or water cleaning, and has a storage period of 1-3 years.