An anti-static wrist strap is used to discharge static electricity from the human body. It consists of anti-static elastic band, movable snap button, spring cord. Protective resistor and plug or collet. The inner layer of the elastic band is woven with an antistatic yarn, and the outer layer is woven with ordinary yarn. Main Indicators The maximum length of the spring cord is 250cm. The leakage resistance is 106Ω (protection resistance 106Ω). A corded, cordless wrist strap is detailed.
The wireless electrostatic wristband is based on the physical principle of (static voltage balance). It is developed based on the principle of “electrostatic engineering” static electricity, which is transmitted by the push between ions. The pushing characteristics push the human body electrostatic ions into the design of the drought main body (collection area). The [charge induction principle] will make the front and back surfaces of the conductive plate carry the "equal anisotropy charge"-skin effect, due to the built-in area. There is an ion exchanger <Using its low free energy characteristic>, which can easily provide the same amount of electrostatic charges introduced into the neutralized charge for neutralization, so that the effect of electrostatic discharge can be achieved, and a screw and internal part are provided outside the machine. The conductor loop is connected.
(1) It can be used as a person to improperly touch the high static power source, causing a large amount of static charge to be introduced instantaneously. When the ion is not neutralized, the ion neutralization can be provided by the external air water molecules (which is the Corona discharge effect). In order to effectively eliminate static electricity, the ultimate goal of electrostatic discharge (static voltage balance) is achieved.
(2) This screw can be used for potential zero return function (just touch the screw to ground).
(3) It can be used as a loop detection terminal.