Anti-static tape can be used for electronic protection and paste in the circuit board manufacturing industry, especially suitable for SMT temperature protection, electronics
Switches, PCB gold finger protection, electronic transformers, relays and other electronic components that require high temperature and moisture protection.
There are two kinds of anti-static tapes, one is high temperature anti-static tape and the other is ordinary anti-static mesh tape. Resist
High-temperature anti-static tape has white transparent, red, green, brown and other colors, ordinary anti-static tape has mesh black and mesh
Grid brown in two colors.
The anti-static black mesh tape is made of anti-static OPP material. Has the characteristics of venting static charge and has good
transparency. When used, it only produces electrostatic voltage below 100V (generally tape ≥5000V), which greatly reduces the product packaging.
The resulting electrostatic hazard.
High temperature antistatic tape is mainly used in microelectronics, semiconductor, precision machinery and other industries.
The brown PET film, coated with silica gel, has a temperature resistance of between 120 and 260 degrees. Due to some industry
The temperature of the application does not need to be too high, no more than 260 degrees, the maximum temperature resistance of PET is 220°, and some inferior high temperature resistance
The electrostatic tape has a temperature resistance of less than 150°.
For high temperature antistatic tape, it is mainly identified from the following points:
Taste
2. Appearance;
3. Residue after ignition and combustion;
4. Actual high temperature test, over 260 ° high temperature, check for residual glue, shrinkage and so on.
