How to clean anti-static work clothes is correct
With the rise of various emerging industries, anti-static clothing has been more and more widely used in various industries, such as biopharmaceuticals, semiconductor new energy, optoelectronic display, microelectronics, precision instruments, aviation research and other industries. While anti-static clothing is widely used, its cleaning has also attracted much attention. Irregular cleaning will reduce the performance of anti-static clothing.
Anti-static clothing can of course be washed. But you need to pay attention to it when cleaning the anti-static clothing. Under normal cleaning conditions, the water used for wet and dry cleaning should be filtered, and the solvent should also be distilled. After that, use a filter membrane with a pore size of less than 0.2 μm at the point of use, and filter more than once as needed. In order to remove water-soluble pollutants before cleaning, after washing with water, use solvent for final washing to remove oily pollutants. Before washing, check the accessories such as scratches, damage and buckles, and repair, replace or scrap the defective ones. It is best to wash anti-static clothing with neutral detergent, do not mix with other clothes when washing, and use hand washing or washing machine soft washing procedures to avoid conductive fibers from breaking. The washing water temperature should be below 40°C, and clean water at room temperature should be used for rinsing. The washing time should be as short as possible, but it must be fully rinsed to remove residual detergent. Do not use bleaching powder or organic solvents to decontaminate anti-static overalls with flame-retardant and oil-proof properties. If you don't know how to clean Jingshangjingmei, it is recommended that you find a professional manufacturer to clean it, which is safer.