At present, because the competition of domestic anti-static flooring is too fierce, coupled with the soaring price of steel plates, many manufacturers have severely cut corners, and counterfeit products are simply flooding, and disorderly competition has caused difficulties.
The tricks of shoddy products to cut corners are as follows:
1. The thickness of the anti-static floor steel plate is reduced from 0.8mm to 0.3mm and 0.4mm. The anti-static floor of the corner-cutting material has no strength at all, let alone reach the national standard? ! The anti-static floor is too soft, the sound of the car is squeaking, and the surrounding area is reversed in a short period of time. The serious floor breaks, causing the downs and the inability to walk.
2, anti-static veneer can not reach the anti-static standard, that is, the anti-static system resistance value of the veneer is less than 1x105 ~ 1x109 ohms, resulting in the floor is not anti-static. Therefore, on the surface, the customer purchased an anti-static floor. In fact, the customer purchased an overhead floor instead of an anti-static floor.
3, the veneer does not reach high wear resistance, the use time is not long, the veneer surface pattern has been worn away. This veneered surface is not heightened with abrasion resistant paper.
