How to install anti-static equipment more standardized?
Abstract: The electronics industry is the production of high-precision components. The impact of static electricity on the electronics industry is the most fundamental and most lethal.
Today, there are many static-dissipating devices, and the most widely used ion fan. So, how do electronic anti-static devices connect to the anti-static grounding wire? We already know that today we will talk about the installation requirements of anti-static equipment.
(1) The discharge electrode should be installed at the position with the highest potential of the charged body. Under normal circumstances, it should be separated from the static electricity generation source by 0.5~20cm;
(2) The discharge electrode is vertically mounted facing the charged body;
(3) Do not install the anti-electrostatic electrode of the anti-static device under the following conditions, that is, there are metal objects, static electricity generation sources, and other static eliminators near the charged body, the ambient temperature is above 150 ° C, and the relative humidity is above 80%, and Confined to places where anti-static equipment is contaminated;
(4) When the array anti-static equipment is installed, the distance between the electrodes should be greater than or equal to 4 times the installation distance;
(5) The high voltage power supply should be installed in a non-explosion-proof place.