How to install anti-static grounding buckle

Nov 27, 2019 Leave a message

How to install anti-static grounding buckle


Recently, customers have encountered many problems in the installation of electrostatic buckles. Some customers require that the electrostatic buckle cannot be loosened. If the electrostatic buckle cannot be removed, it can be customized to be permanent. It cannot be removed by hand. Install the glue on the electrostatic skin on the work surface, so be sure to install the electrostatic buckle before sticking the glue (do not stick the glue before installing the electrostatic buckle),

Installation method and schematic diagram of anti-static ground wire and anti-static table mat:

All customers who purchase anti-static grounding wires and anti-static mats in our company can call for installation methods. Our company has professional technical staff to guide you. Whether the grounding is correct will directly affect the anti-static effect of the entire production workshop. Want to use an anti-static ground wire? For ESD safety stations, the concept of grounding the ground wire is to make all conductors at the same potential, so that the potential difference between the two conductors is reduced to a small level. Since the power ground and the ground are always in the control area, it is a more convenient connection point. If the ESD wrist strap and the ESD table mat are connected to the same ground point, they have the same potential, which is the correct installation method.


The anti-static grounding buckle is first connected to the ESD table mat, then passes through the table mat, passes through the diagonal of the table mat, and is grounded. In this connection, the table mat has additional series resistance (resistance or capacitance) to the ground. The user can be at a different potential than a grounded benchtop device or an ESD-sensitive device located on a bench mat. Ground wire, each socket has 1M ohm resistance; 0M ohm resistance can be realized; black and blue PVC insulation layer; 10 feet ground wire. Shenzhen Haiwei Dahang Technology Co., Ltd. specializes in providing anti-static wrist straps, ground wires and other anti-static consumable products. This section guarantees the quality of the star claw ground wire. Welcome to buy! It is mainly composed of star claw or buckle cap, thread and crocodile clip. There are PVC ground wire, PU ground wire, double hole ground wire and suction cup ground wire. There are many forms: suction cup + suction cup ground wire, suction cup + alligator clip ground wire, suction cup ground wire + terminal, screw + alligator clip ground wire. Can be customized according to requirements. Anti-static ground wire (suction cup + fish clip) This section guarantees the quality of the star claw ground wire. Welcome to buy! It is mainly composed of star claw or buckle cap, ** line and crocodile clip. There are PVC ground wire, PU ground wire, double hole ground wire and suction cup ground wire. There are many forms: suction cup + suction cup ground wire, suction cup + alligator clip ground wire, suction cup ground wire + terminal, screw + alligator clip ground wire.


Can be customized according to requirements, the specific installation method is as follows:


1.Put the anti-static table mat on the work table, and install the anti-static ground wire on the corner of the work table;


2. Cut the anti-static table mat into a small opening, and insert the star claw part of the ground wire into it.


3.The other end of the anti-static grounding wire is a catfish clip holding the anti-static grounding bus;


4. Measure whether the anti-static grounding wire, anti-static mat and the ground are connected, the test passes, that is, the anti-static grounding device is basically completed