How to judge the quality of cleanroom wiper

How to judge the quality of the quality of cleanroom cloth? For the purchaser, I definitely hope to buy a clean cloth with very good quality, but the actual situation is often unsatisfactory. So how do we judge the quality of the clean cloth when purchasing the dust-free cloth?

There are three main points. The following is a detailed analysis of the dust-free cloth type selection, the dust-free cloth, the different dust-collecting methods, and the dust-free cloth quality inspection. Let everyone know more about how to judge the quality of the clean cloth. Bad. Understand how to choose a clean cloth, then the next concern is how much money a clean cloth! Many friends pay attention to the quality while paying attention to the price, so in the case of the same quality, the price is a key option.
For the choice of cleanroom wiper, the main thing is to look at the basis weight, type and quality, softness, anti-wear degree to compare, in order to quickly understand the quality of the clean cloth:
1. Basis weight: Whether the basis weight of the same fabric is the same
2. Type and quality: High quality microfiber, low polyester fiber
3. Softness: The softer the better
4. Wear resistance: the stronger the fiber, the less fiber
In the dust-free cloth different edge-sealing method, there are four kinds of edge-sealing methods. Generally, the dust-free cloth on the market can be divided into: hot cutting, ultrasonic cutting, laser cutting and general cold cutting. Then compare the way it is edged.
1. Laser cutting: the edge degree is up to 99%, no chipping, no dust, the highest technology and cost
2. Ultrasonic cutting: the degree of edge sealing is less than 80%, no chipping, and it is easy to tear and chip off after cleaning.
3. Thermal cutting: the degree of edge sealing is less than 75%, no chipping, and the edge is easy to tear and chip after cleaning.
4. General cold cutting: unsealed, easier to chip, low technology and cost
The last point is also extremely important. For the quality inspection of clean cloth, see if it meets the national standards and market inspection requirements. This is also very fundamental to see the quality of the clean cloth, because the dust-free cloth manufacturer If these standards are not met, the quality of the clean cloth produced is certainly not very good.

1. Is there a certification unit inspection report?
2. Ion content: Whether it is within the reference test standard
3. Water absorption: Whether it meets the product requirements
4. Wipeability: The stronger the better
5. Dust amount: the lower the better

