How to lay anti-static mats on the ground to be effective
Put xylene in the cleaning machine to clean the ground that needs to be laid with anti-static floor mats, and lay the measured quantity and length of copper strips on the ground according to the ground laying requirements. In this process, in order to allow static electricity to be introduced into the ground , You need to lead one end of the copper strip to the ground. After the copper tape is laid and the grounding is completed, clean the ground, apply conductive glue after drying, wait for about half an hour, when the conductive glue is not sticky, stick the anti-static floor mat to the ground, use a roller or a small Hammer rolling or beating to make the two surfaces fit together smoothly, and you can use it with confidence after the glue is completely dry.