How to use the anti-static tester
1. Install at the entrance of EPA (electrostatic control area) to test whether the electricity of the human body through the wrist strap and work shoes is qualified
2. Test the grounding of the wrist strap and the grounding of the work shoes at the same time (independent testing of left/right feet)
3. Can test single-line and double-line wrist straps
4. Optional 50755 sensor grip, can be tested even with gloves/finger cots
5. Three groups of LEDs respectively indicate high/pass/low resistance of the wrist strap, left shoe and right shoe
6. With normally open (NO) and normally closed (NC) dry contacts, access control, alarm lights or other devices can be connected
7. Solid-state buttons (blue LED backlight), no mechanical wear
8. Qualified resistance value of work shoes grounding:
Upper resistance value: can be set to 10MΩ, 35MΩ, 100MΩ, 1GΩ
Lower limit resistance: can be set to 100KΩ, 750KΩ
Can be set to not test
9. Qualified resistance value of wrist strap grounding:
Upper resistance value: can be set to 10MΩ, 35MΩ
Lower limit resistance: fixed value 750KΩ
Can be set to not test