How to use the anti-static turnover box?
1. The plastic pallet should be handled with care to avoid uneven force and damage when landing.
2. When placing the goods, they should be evenly placed to avoid that the sharp surface is directly pressed on the bottom of the turnover box, which may cause side distortion or damage due to uneven force, and damage the goods in the box when it is more serious.
3. When using the matching pallet, you should consider whether the size of the turnover box is suitable for the use of this plastic pallet, so as to avoid improper size, improper placement, and side tilt or overturning.
4. When stacking is used, the load-bearing capacity of its own turnover box should be considered, and the stacking height is the most restrictive.
The correct use of the turnover box should be such that the weight of a single box does not exceed 25KG (normal human body restrictions), and the box cannot be filled. At least 20mm (excluding the upper joint) should be left to prevent the goods from directly contacting the bottom of the box. Make the product damaged or dirty. The combination code of the turnover box is placed on the plastic pallet with proper strapping and wrapping, which is convenient for mechanical loading and unloading and transportation, so as to meet the requirements of loading, unloading, transportation and storage. In order to make the turnover box can be used safely for a long time, we hope to use the plastic pallet correctly according to the following requirements:
1. The turnover box should avoid exposure to sunlight to avoid aging and shorten the service life.
2. It is strictly forbidden to throw the goods from a height in the turnover box. Reasonably determine how the goods are stacked in the turnover box. Place the goods evenly, do not stack them together, or stack them off-center.
3. It is strictly forbidden to drop the turnover box from a high place to avoid breaking and cracking of the turnover box due to violent impact.
4. When working with forklifts or manual hydraulic trucks, the fork stabs should lift the pallet as smoothly as possible before changing the angle. Do not hit the side of the pallet with forks to avoid breaking the pallet and indirectly damaging the turnover box and the goods.
5. When the pallet is on the shelf, the shelf-type pallet must be used. The carrying capacity is determined by the shelf structure, and overloading is strictly prohibited.