How to use the ion fan correctly?
Nowadays, many manufacturers are worried about static electricity. Always consult us (Anti-Static Products Information Network) for a good method. We would recommend the use of an ion fan, but the customer will also react to the ion fan regardless of the quality, is it not the quality? In fact, the use of ion fans is still very good, but sometimes it can be invalidated by improper use.
Some people think that the dust can not be removed is the quality of the ion fan is not good, in fact, this judgment is wrong. The dust particles are divided into dry type particles and mixed type oily particles dust. The dry type particle dust is very effective in removing dust by the ion fan. After the static electricity is removed, the tiny air volume can blow off the dust. If it is oily particulate dust, only the dry dust attached to the oily particles is blown off by the ion fan. The oily particles and dust remaining on the surface of the product cannot be blown off. It is necessary to wipe with a dust-free cloth and an appropriate amount of drops. Solve the problem.
Ion fan
Some customers think that the faster the wind speed of the ion fan, the larger the air volume, the better the dust removal effect. In fact, this view is not correct. It depends on the environment and product shape used. If it is in a clean environment, the product is very regular and flat, in fact, only a small amount of air volume can be achieved. Because in this environment, the object of dust removal mainly settles automatically, the external pollution source is non-oily particle dust, and the product surface forms a 30° inclination angle with the airflow surface, which can be formed by a single blow. On the contrary, the harm caused by the large volume of gas and the fast flow rate is to change the direction of the airflow in the clean room. The indiscriminate blowing causes a large area of dust pollution, and the product quality is difficult to control.
It can be seen that people using ion blowers must confirm the object and use the most appropriate wind speed to blow off the dust, which saves time and effort.