Materials for Anti-Static Shielding Bags

Nov 18, 2026 Leave a message

Materials for Anti-Static Shielding Bags
Anti-static shielding bags are typically constructed from one of two material combinations: APET/CPP (metallized polyester film/cast polypropylene film) or APET/CPE (metallized polyester film/polyethylene film). APET/CPP offers good transparency and a relatively rigid, firm feel, though it has lower tear resistance. APET/CPE, by contrast, provides superior heat-sealing properties, higher tear resistance, and greater tensile strength, with a softer feel. Both types feature a translucent, silver-gray appearance, allowing the contents to be seen.
Key Specifications:

esd antistatic bag

esd bag film roll

Surface Resistance: 10⁶ – 10¹¹ Ω/sq
Inner Layer Resistance: 10⁶ – 10¹¹ Ω/sq
Standard Thickness: 0.075 – 0.18 mm
Anti-Static Value: 1 × 10⁸ Ω – 9 × 10¹⁰ Ω
Water Vapor Transmission Rate (WVTR): ≤ 0.31 g/m²·24h
Residual Voltage (Electrostatic Shielding): ≤ 30 V
Electromagnetic Interference (EMI) Attenuation: ≥ 25 dB
Test Methods: ASTM F1249-13, ASTM D3985-2005(2010)e1