Precautions for using dust-free esd anti-static masks
Anti-static masks are made of special polyester filaments and high-performance conductive fibers woven through a special process. The anti-static masks made of this fabric through a special sewing process have excellent and long-lasting anti-static and dust-proof properties, and can effectively release static electricity from the human body. charge. In order to use dust-free anti-static masks better, safer and more effectively, Yihetong shares with you the precautions for using dust-free anti-static masks.
1. Failure to wear protective masks and long-term exposure to certain dust, fog, smoke, poisonous gas and poisonous vapor environments can lead to illness and death.
2. Every time you wear a dust mask, you should immediately check the fit to ensure that the mask is worn in the correct position.
3. Masks should be worn at all times when exposed to polluted environments.
4. When you feel that the breathing resistance has increased significantly, or when the mask is damaged, you should replace the mask.
5. This mask cannot be sterilized in a microwave oven and cannot be washed. Washing with water will destroy the structure of the filter material, cause penetration, and destroy the filtration performance of the electrostatic filter material.
6. When not in use, store the mask in a clean place. If it is not used for a long time, it should be stored in a clean sealed bag to prevent the filter material from electrostatically adsorbing dust in the air.
7. Dust masks are personal hygiene products and should be used exclusively by designated persons.
8. This dust mask is in industrial packaging and is generally used in industrial channels.
Special Note
Every time you wear a mask, please first perform a positive pressure tightness test on the mask as follows.
For a mask without a breathing valve, completely cover the mask with both hands and then breathe. The mask should expand slightly outward. If you feel that there is air leakage between your face and the mask, please readjust the position of the mask and adjust the nose clip. The seal is good. If your mask does not seal well with your face, do not enter the contaminated area and inform relevant personnel to replace the mask.