Properties of Materials in Sensitive Environments

Oct 16, 2025 Leave a message

Properties of Materials in Sensitive Environments

Generally speaking, materials used in any production environment can be categorized as: insulating, antistatic, static-dissipative, and conductive.

Insulating materials have a surface resistivity greater than 10^14 Ω/square. Insulating materials tend to retain charge, making grounding them useless because current cannot flow through insulators. To prevent damage from ESD, insulating materials should be kept away from electronic components and assembly areas. Examples of such materials are plastics, including polyethylene, polyvinyl chloride, ceramics, and rubber. Combining plastics with conductive or antistatic materials can protect components from ESD.

Antistatic materials resist the generation of static electricity. These materials have a surface resistivity of 10^9 to 10^14 Ω/square. They have a short lifespan, so their reuse for storing assembled circuit boards and electronic components is limited. Their high surface resistivity means that grounding these materials will not completely discharge any accumulated charge.

ESD ROPE 2

ESD ROPE

Static-dissipative materials have a surface resistivity of 10^5 to 10^9 Ω/square. If you use this material to protect components from static electricity and connect static-dissipative shields to ground, the low resistivity allows the charge on the components to be transferred to ground. Friction can generate static charge in these materials, but the good conductivity distributes the charge evenly across the surface. These materials are typically used for floor coverings, tabletops, assembly areas, or work uniforms.

Conductive materials have a surface resistivity of less than 10^5 Ω/square. Charge accumulated on the surface of conductive materials can be discharged to ground. The electronics industry uses plastics doped with conductive materials to package electronic components and circuit boards.