Some suggestions about wearing anti-static foot ring
Anti-static foot ring is one of the protective measures used in the workshops of electronics and other industries. It is composed of conductive rubber, Velcro and conductive webbing. It is mainly used to introduce the static charge accumulated and generated by the human body into the earth. Play the role of anti-static, its grounding resistance is about 10^6Ω, and regarding the wearing of anti-static foot ring, the editor here gives you some suggestions.
The anti-static foot ring should be worn on both feet at the same time to increase the contact area between the anti-static foot ring and the ground, so that the static charge can be introduced into the earth faster, thereby reducing the harm of static electricity; and the place where the anti-static foot ring is used It must be an anti-static floor or ground with a complete grounding system, and an anti-static table mat should be laid on the ground as much as possible, so that the static electricity generated by the human body can be introduced to the ground through the anti-static foot ring, anti-static table mat, and ground wire Medium; In some places with higher requirements, anti-static shoes and anti-static foot loops are needed at the same time, and try not to wear chemical fiber socks and other clothing.
All in all, the anti-static foot ring is an additional layer of protection for the anti-static measures in the workshop to achieve a greater extent to discharge the accumulated static charges generated by the human body into the earth, thereby protecting the product and the human body from static electricity.