Steps for wearing ESD anti-static TC cotton coat
What are the correct steps to wear anti-static clothing? Many friends don't wear anti-static clothes correctly after buying them. Some people just wear ESD anti-static clothes and then enter the workplace. This is wrong. For anti-static clothing to exert its full performance, it needs to be used in conjunction with other anti-static products. Anti-static clothing has certain wearing standards and requirements.
Steps for wearing anti-static clothing
1. Put on inner latex gloves.
2. Wear an ESD anti-static cap. Arrange your hair and try to keep all of it within the cap.
3. Wear a mask. ①Wear it. ②Shape the nose clip. ③Tightness inspection.
4. Wear anti-static clothing. Pull the zipper to the appropriate position, hold the opening of the waist zipper of the anti-static clothing with your left and right hand at the same time, put on the lower limbs first, then the upper limbs, then pull the zipper to the chest, put on the one-piece cap, and finally pull the zipper to At the top and glue the collar sticker.
5. Wear anti-static glasses. Check the elasticity of the headband. After putting it on, adjust it until it feels comfortable. The headband is pressed outside the one-piece cap, and the lower edge of the glasses and the mask are combined as tightly as possible.
6. Put on the inner short shoe cover.
7. Wear long outer shoe covers or rubber shoes, and be sure to tuck the top of the anti-static clothing pants into the outer shoe covers or rubber shoes.
8. Wear outer latex gloves and tuck the cuffs of the anti-static clothing into the gloves.
9. Carefully check the complete set of anti-static equipment and check with teammates to make sure there is no omission or damage.