Basic aspects of the programmable controller application, design techniques and application examples. Through the study of this chapter, the reader can understand the general principles and steps of the programmable controller system design, hardware configuration, software design, familiar with the basic links and design skills of software and hardware design.
For controlled objects in the industrial or other fields, the purpose of electrical control is to maximize production efficiency and product quality while meeting the requirements of its production process. In order to achieve this purpose, the dust pad and the sticky roller should follow the following principles when designing the programmable control system:
1 to meet the requirements of the controlled object to the maximum extent;
2 Under the premise of meeting the control requirements, strive to make the control system simple, economical, applicable and easy to maintain;
3 to ensure the safety and reliability of the system;
4 Considering the requirements of production development and process improvement, an appropriate margin should be left in the selection.
The main contents of PLC control system design include the following aspects.
(1) Analyze control objects and clarify design tasks and requirements
Application of programmable controller, first of all to analyze the controlled object, control process and requirements in detail, familiar with the process after the plow, control system all functions and indicators requirements, if the industrial environment of the control object is poor, but the safety and reliability requirements Special high,
The system process is complicated, and the input/output amount is more than the switching amount. In this case, it is difficult to use the conventional relay and the contactor, and it is suitable to control with the programmable controller. After the control object is determined, the control of the programmable controller is further
clear. In general, it can reflect the operation of the production process, and can directly measure the parameters of the sensor. The manual control is large, the operation is complicated, the error is easy, or the operation is too frequent. The manual operation is not easy to meet the process requirements. Dust mats, sticky drums are often made of PI. C control.
(2) Select the model of the PLC to configure the hardware of the control system
The basic principle of PLC model selection should be to consider the structure, function, uniformity and online programming requirements in the case of meeting the functional requirements. In terms of structure, for the case where the process is relatively fixed and the environmental conditions are good, the general maintenance amount
Smaller, a PLc with a monolithic structure can be used. In other cases, a modular PLc can be used. Functional aspects For the control project of the switch quantity control, there is no need to consider the control speed, and the general low-end model can be satisfied. For switching, mainly with a small amount of simulation
For volume control projects, low-end models with A/D, D/A conversion, addition and subtraction and data transfer functions are available. For engineering projects with complex control and high control functions, the scale of visual control and its complexity are selected for mid-range or high-end machines.
Among them, high-end machines are mainly used for large-scale process control, full PLc step-by-step control system and automation of the entire factory, such as sticky mats and sticky drums. In order to realize resource sharing, the PLc configuration of the same model is adopted, and after the upper computer is equipped, multiple PLcs controlling each independent system can be connected into one multi-level distributed control system to communicate with each other and centrally manage.
(3) Select the required input/output module, and compile the PLC input/output distribution table and input/output terminal wiring diagram
The task of the programmable controller input module is to detect the high level signal from the field device and convert it into the internal level signal of the machine. The module type is divided into DC 5V, 12V, 24V, 60V, 68V, AC 115V and 220V. . The magnitude of the voltage is chosen by the proximity of the field device to the module. Generally, 5V, 12V, and 24V are low level, and the transmission distance should not be too far. The module with higher voltage is more reliable than the module with higher voltage. In addition, the number of simultaneous high-density input modules depends on the input voltage and ambient temperature. In general, the number of simultaneous connection points must not exceed 60%. In order to improve the stability of the system, the difference between the turn-on level and the turn-off level, that is, the threshold level must be considered. The larger the threshold value, the stronger the anti-interference ability and the longer the transmission distance.
The task of the programmable controller output module is to convert the internal signal level of the machine into a control signal for the external process. For high switching, inductive, low power factor loads, thyristor output modules are suitable, but the module price is high, overload capability
Slightly worse. The advantage of the relay output module is that the applicable voltage range is wide, the conduction voltage drop loss is small, the price is low, but the life is short and the response speed is slow. The current accumulated value of the output module simultaneously turning on the number of points must be smaller than the current value allowed by the common terminal.
The current value of the outgoing module must be greater than the rated value of the load current.
(4) According to the system design requirements, write the specification of the program specification, and then use the corresponding programming language for programming.
The program specification should include technical requirements and basis for compilation. For example, program module function requirements; control object and its action timing; accuracy requirements; response speed requirements; input device; input conditions; output conditions; interface strip
Piece; input module and output module interface; I / O allocation table and other content. According to the hardware structure and production process requirements of the PLc control system, the process of compiling the actual application program is based on the program specification and the corresponding programming language instructions.
Order design.
(5) Design the console, electrical cabinet, and select the required electrical components
According to the actual control system requirements, design the appropriate operating console and electrical cabinet, and select the required electrical components according to system requirements.
(6) Writing design specifications and operating instructions
The design specification is a comprehensive description of the entire design process, generally including the basis of the design, the basic structure, the analysis of each functional unit, the formula and principle used, the source and operation of each parameter, and the debugging of the program. Operation instructions
The book is mainly for use by users and on-site commissioning personnel, and generally includes operational specifications, procedures, and common faults.
According to the specific control object, the above content can be appropriately adjusted.





