What is the difference between wet electrostatic precipitator and dry electrostatic precipitator

Jan 08, 2021 Leave a message

What is the difference between wet electrostatic precipitator and dry electrostatic precipitator

Wet electrostatic precipitator and dry electrostatic precipitator are two types of electrostatic precipitators, so what is the difference between these two types of electrostatic precipitators? Wet electrostatic precipitator dust removal and conventional dry electrostatic precipitator are the principle during operation The above is the same, why are there categories? This is because the flue gas environment is different (dry and wet).

Working principle of wet electrostatic precipitator: DC high voltage ionizes the gas in the space near the cathode line, and the dust particles move under the action of the electric field after being charged and deposit on the surface of the dust collecting anode. The wet electrostatic precipitator uses water film or washing on the surface of the dust collecting anode. Remove dust.

  Wet electrostatic precipitator is mainly composed of shell, anode device, cathode device, insulation device, washing system and high voltage unit.

  The functions of each part of the wet electrostatic precipitator:

  1. Shell: generally made of corrosion-resistant materials such as steel-lined glass flakes. Divided into vertical structure and horizontal structure. The shell shape is divided into round and square. According to the actual situation, it can be installed in the upper part of the desulfurization tower or separately.

   2. Air intake mode: different settings can be set according to actual conditions.

  Vertical structure: air intake from the lower part, air out from the upper part; or air in the upper part and air out from the lower part.

  Horizontal structure: flat in, flat out, etc.

  3. Dust collecting anode plate: use corrosion-resistant materials, each material has its own advantages and disadvantages, and it is selected according to the actual conditions such as medium composition and temperature. Due to the large amount of desulfurization flue gas, the anode is generally plate type and honeycomb type; others are mostly round tube type and honeycomb type.

  4. Discharge cathode: There are a variety of materials and models to choose from. According to the gas conditions, the corrosion-resistant materials are mainly selected as follows: stainless steel, lead-antimony alloy, and titanium alloy.

   5. Insulation device: The main heating methods are electric heating and hot air heating. Prevent condensation and creepage of the insulated quartz tube in the insulated box.

  6. Flushing system: intermittent flushing or continuous flushing.

  Operating in a corrosive gas environment, the shell and internal components must be made of anti-corrosion materials and treated with anti-corrosion.

   Wet electrostatic precipitator and dry electrostatic precipitator have no obvious difference in working principle. The difference between the two is mainly the environment generated by flue gas.