Working principle of electrostatic gun




When working, electrostatic spraying spray gun or spray disc, spray cup, the part of the paint particles is connected to the negative electrode, and the workpiece is connected to the positive electrode and grounded. Under the high voltage of the high voltage power supply, the end of the spray gun (or spray plate, spray cup) and the workpiece An electrostatic field is formed. The electric field force received by the paint particles is proportional to the voltage of the electrostatic field and the charge amount of the paint particles, and inversely proportional to the distance between the spray gun and the workpiece. When the voltage is high enough, the area near the end of the spray gun forms an air ionization zone, and the air is intense Ground ionization and heating make the sharp edge of the spray gun or around the pole needle form a dark red halo, which can be clearly seen in the dark. At this time, the air produces a strong corona discharge.
Most of the film-forming materials in coatings, such as resins and pigments, are composed of high-molecular organic compounds, mostly conductive dielectrics. In addition to film-forming materials, solvent-based coatings also include organic solvents, cosolvents, curing agents, electrostatic diluents, And other various additives and other substances. Except for benzene, xylene, solvent gasoline, etc., most of these solvent substances are polar substances with low electrical resistivity and certain conductivity. They can improve the charging performance of the coating.
The molecular structure of dielectrics can be divided into two types: polar molecules and non-polar molecules. A dielectric composed of polar molecules exhibits electrical properties when subjected to an external electric field; a dielectric composed of non-polar molecules exhibits electrical properties under an external electric field, thereby generating an affinity for external conductive charges, so that the dielectric is applied The outer surface can be locally charged in the electric field.
The paint is sprayed out after being atomized by the nozzle. When the atomized paint particles pass through the pole needle of the muzzle or the edge of the spray plate and the spray cup, they are charged due to contact. When they pass through the gas ionization zone generated by corona discharge, they will be charged again. Increase its surface charge density at one time. Under the action of the electrostatic field of these negatively charged paint particles, they move on the surface of the workpiece with guiding polarity and are deposited on the surface of the workpiece to form a uniform coating film.

