A Good Way To Eliminate Static Electricity In Plastic Processing Plants

Apr 24, 2021 Leave a message

A good way to eliminate static electricity in plastic processing plants


That is, plastic materials are produced and processed to make plastic semi-finished products or finished products. And because of its good insulating properties, plastics are very easy to generate static electricity during the production process due to handling, contact, separation, friction, collision, electromagnetic induction, etc., and stay on the surface of the article for a long time. After the static voltage value, it will cause static electricity hazard.

For the static electricity problem in the plastics industry, there are usually chemical methods and physical methods.

1. Chemical methods. That is, an antistatic agent that has a moisture absorption effect and is harmless to the plastic is added to the plastic material to reduce the resistance of the surface. The types of antistatic agents selected according to different types of plastics are used; both ionic and non-ionic are hygroscopic antistatic agents. After adding these additives, these materials can absorb moisture in the air and reduce surface resistance. Achieve anti-static performance.

2. Physical methods. The most commonly used measures are grounding and maintaining the temperature and humidity of the working environment. It is also possible to install some special products specifically used to eliminate static electricity in jobs where static electricity is extremely prone to eliminate static electricity.

1. Install static elimination equipment on high-speed blister forming machines, slitting machines, stretch winding machines and other plastic machinery and equipment, which can effectively eliminate high-voltage static electricity generated when plastic sheets are pulled at high speeds, and prevent sheets from being absorbed in the air due to static electricity The dust or sheets adhere to each other due to static electricity, which effectively improves the product grade and quality of the plastic sheet after production and processing.

2. Install a ring-type static elimination device (static ion bar) at the entrance of the plastic raw material of the plastic injection molding machine to eliminate high-voltage static electricity generated by the raw material in the flow, so as to prevent the raw material from forming agglomerates and piles directly at the entrance affect production.

In addition to the above methods, plastics with conductive properties can also be directly used to process their products. From the current domestic market, most conductive plastics are still in black color, and light-colored conductive plastics are still being developed and developed. in.