Anti-static chair test and purchase



Anti-static chair, square tube stool, mainly made of PP injection molding, anti-static PU/PVC leather, PU foam material, (anti-static chair) the resistance value of the surface of the material is below 10 to the 6th power or 10 to the 6th power To the 11th power of 10 ohms. The anti-static chair surface has high strength, high hardness, abrasion and corrosion resistance, impact resistance, fission resistance, heat dissipation and ventilation, comfortable texture, suitable for environments with anti-static requirements and ten thousand clean rooms, alcohol resistance (only PVC).
One: Test method of anti-static chair:
Reference standard: General specification for anti-static testing of electronic product manufacturing and application systems
The point-to-point resistance test method between the chair surface and the backrest meets the requirements of 6.1, the test position
The system resistance test between the chair surface and the casters meets the requirements of 6.1. During the test, place a 200mm*200mm conductive plate under the casters and make good contact. One electrode is in contact with the conductive plate, and the other is in good contact with the chair surface.
Point-to-point resistance and system resistance test:
Electrode structure size used: diameter of column electrode 63 mm±3 mm: (anti-static chair) electrode material is stainless steel or copper; electrode contact end material is conductive rubber, hardness 60±10 (Shore A level), thickness 6mm±1mm, its The volume resistance is less than 500Ω: the electrode unit weight is 2.25 kg~2.5 kg.
When testing point-to-point resistance, the product (material) should be placed on an insulating table or placed in actual use. The surface resistance and volume resistance of the mesa are respectively greater than 1x10^13Ω, and the geometric peripheral dimensions are both greater than 10 cm of the measured material. The distance between the electrodes is 300 mm. When testing on the ground, the distance between the electrodes is 900 mm to 1000 mm.
Two: Suggestions for choosing an anti-static chair:
1. If the lengthened pneumatic lift rod is selected to increase the height of the chair surface, a foot ring can be added to increase the comfort.
2. Choose anti-static wheels for easy movement; choose anti-static foot cups (also called suction cups) for easy fixation (Suzhou aluminum alloy folding doors).
3. The higher level of purification is PP injection chair and PU foam chair.
4. PU/PVC leather chair with better comfort.

