Anti-static ESD screw tray
Anti-static screw tray - an auxiliary tool that can greatly increase the speed of screw locking.
All-plastic anti-static screw disk: It is an auxiliary tool that can greatly increase the speed of screw locking. It arranges the scattered screws neatly so that the cross-recessed ends of the screw heads are facing upwards. The operator holds an electric screwdriver in one hand to extract the screws from the screw disk. Screws, hold the workpiece in the other hand, no longer need to use hands to pick up the screw and put it on the screwdriver head, which greatly improves the speed of screw locking;
This screw plate is made of anti-static plastic material, which is wear-resistant and has a long service life. After using the screw plate to arrange the screws, the electric screwdriver head goes directly to the screw plate to pick up the screws. Human hands do not need to touch the screws, which effectively prevents human hands from touching metal screws. The adverse consequences of causing the screws to rust;
Each screw hole is equipped with a "V"-shaped introduction hole to guide the screw tip to slide into the hole and make the screw more stable so that the screw will not shake when the screwdriver head is extracted;
There are 6 models according to different screw diameters, and a complete list of small screws suitable for M1.0-M3.5mm (mm) is available;
1.0-1.5 means 1.0MM to 1.5MM can be installed
1.5-2.0 means 1.5MM to 2.0MM can be installed
2.0-2.5 means 2.0MM to 2.5MM can be installed
2.5-3.0 can be installed from 2.5MM to 3.0MM
3.0-3.5 means 3.0MM to 3.5MM can be installed
3.5-4.0 means 3.5MM to 4.0MM can be installed
Anti-static screw plate
Anti-static screw disk - an auxiliary tool that can greatly increase the speed of screw locking.
All-plastic anti-static screw disk: It is an auxiliary tool that can greatly increase the speed of screw locking. It arranges the scattered screws neatly so that the cross-recessed ends of the screw heads are facing upwards. The operator holds an electric screwdriver in one hand to extract the screws from the screw disk. Screws, hold the workpiece in the other hand, no longer need to use hands to pick up the screw and put it on the screwdriver head, which greatly improves the speed of screw locking;
This screw plate is made of anti-static plastic material, which is wear-resistant and has a long service life. After using the screw plate to arrange the screws, the electric screwdriver head goes directly to the screw plate to pick up the screws. Human hands do not need to touch the screws, which effectively prevents human hands from touching metal screws. The adverse consequences of causing the screws to rust;
Each screw hole is equipped with a "V"-shaped introduction hole to guide the screw tip to slide into the hole and make the screw more stable so that the screw will not shake when the screwdriver head is extracted;
There are 6 models according to different screw diameters, and a complete list of small screws suitable for M1.0-M3.5mm (mm) is available;
1.0-1.5 means 1.0MM to 1.5MM can be installed
1.5-2.0 means 1.5MM to 2.0MM can be installed
2.0-2.5 means 2.0MM to 2.5MM can be installed
2.5-3.0 can be installed from 2.5MM to 3.0MM
3.0-3.5 means 3.0MM to 3.5MM can be installed
3.5-4.0 means 3.5MM to 4.0MM can be installed