Anti-static experts tell you: how to properly wear anti-static shoes?
Anti-static shoes have become more frequently used shoes in real life. After all, no matter what kind of manufacturers, they only need to engage in some electronic production, or say that medical equipment production and the requirements for the entire static electricity are relatively high. In the industry, they basically choose to wear anti-static shoes, but for some people who have never touched this kind of shoes for the first time, what are the correct ways to wear anti-static shoes? This is indeed theirs. I want to know.
In fact, anti-static shoes should avoid wearing insulated thick socks during the wearing process, because he is anti-static, he must contact the human body through the feet of the human body, and the insulating insole is also best. Don't be prepared, his resistance must be within a reasonable range. Generally speaking, if you wrap your feet tightly, the static electricity in the human body cannot be poured into the ground through such shoes. Once you have some friction caused by static electricity, it can not be excreted, which will cause you to be injured, so in order to ensure your health, it is best not to wear thick socks and thick insoles.
Anti-static shoes have a strong anti-static function, but he is also a shoe. In the process of using such shoes, he himself is also worn out. As long as the whole number of shoes has been worn more than 200 times, it should be Correlate the resistance value of the sole to ensure that his resistance is within a reasonable range. Generally speaking, his resistance must be guaranteed to 10 octaves of 10, and the minimum must be 10 Second ohm.
In the process of measuring the resistance of the shoes, the new shoes should be placed for more than 24 hours. When measuring, the temperature and the humidity in the environment are also required, and at least two of the same measurement environment should be placed. More than an hour, in order to ensure that the final measured answer is very standard, at the same time, when connecting the circuit should also pay attention to the voltage measured on the shoes, to ensure that the motor power should not exceed 3 watts at about 500 volts.
In order to ensure the usual work, the entire Xin Lida anti-static shoes can eliminate some static electricity accumulated inside the human body as soon as possible, therefore, the resistance of some work for this time should not be greater than his normal value.
Moreover, such a special shoe when wearing it also has some specific requirements, such as the bottom of the shoe can not be stained, there are some insulating impurities, and such shoes should also pay attention to waterproof and moisture-proof work.
Main: anti-static wrist strap | table mat | anti-static tester | ion fan, ion wind gun, ion wind stick | anti-static tweezers and so on.