Anti Static Safety Shoes

Sep 04, 2018 Leave a message

What should you pay attention to when using anti-static safety shoes?

Anti-static canvas shoes blue.jpg

Precautions in the use of anti-static safety shoes: 1. Before using the anti-static shoes, the safety shoes should check all the resistances, and record that after a period of use, when the surface of the shoes is significantly contaminated, or the sole is worn, the shoe body When the deformation, or the original person has a static click, the resistance of the anti-static shoes must be re-tested and checked. 2, the resistance of anti-static shoes is affected by humidity, so it should be tested in summer and winter to grasp the range of changes to prevent puncture shoes. 3, anti-static shoes must be equipped with thin nylon socks or socks mixed with conductive fibers, rather than wearing socks and chemical fiber socks. 4, anti-static shoes inside can not be attached to the insole, especially the insulating insole should not adhere to the insulating film or other paint on the sole. 5, anti-static shoes after wearing dirty, to take the professional purification cleaning company cleaning.

anti-static shoes.JPG

When people wear anti-static shoes and have anti-static mats, anti-static composite rubber sheets or anti-static raised floor, they will surely play a good anti-static effect. People wear anti-static shoes and have anti-static mats and anti-static composite glue. Board or anti-static raised floor does not necessarily have a good anti-static effect. Usually people wear socks and pad insoles. Young people's feet are prone to sweating. These socks and pad insoles can also conduct static electricity. However, in the dry season, the socks and pad insoles cannot be guided. Static electricity, and many manufacturers only require workers to wear anti-static clothing and anti-static shoes, ignoring the adverse effects of socks and insoles, making this anti-static shoes and anti-static ground can not play an anti-static effect. Therefore, a "composite body resistance detector" is placed at the entrance of the machine room or factory building, which can quickly and accurately detect those who wear unqualified anti-static shoes, socks and insoles.

Anti-static esd shoes.jpg