Anti-static workbench manufacturing method
Anti-static workbench countertops are generally made of anti-static melamine high-pressure decorative laminates (commonly known as anti-static fireproof panels) made of surface materials and wood materials. The wood material is generally shaving wood, by embedding an electrical conductor such as a steel column, and then passing through a grounding wire, so that the static electricity of the desktop is smoothly leaked to the ground through the grounding wire. Some worktables are made of stainless steel. In order to achieve anti-static effect, an anti-static table mat and table mats need to be placed on the desktop to connect to the ground through the grounding wire, which increases the anti-static function and achieves the effect of static electricity discharge and anti-static work. Taiwan is the anti-static function based on the ordinary workbench and becomes a well-known anti-static work table, anti-static workbench, anti-static workbench, ESD workbench.
Why is We need esd products?
Harm of static electricity:Electrostatic discharge occurs very quickly with high intensity, and usually generates a powerful heat to melt the internal circuitry of the semiconductor chip. Under the electron microscope, the appearance looks like a small bullet hole to the outside, causing prompt and irreversible damage. However, only one-tenth of this hazard occurs during the post-zui testing. What's more serious is that in the other 90% of cases, the electrostatic damage only causes partial degradation, which means that the damaged components can pass the test without any notice, but only after the finished product is delivered to the customer, there is a premature on-site failure. The result is that if Zui loses its reputation, it will compensate a manufacturer for any manufacturing defects, and the economic loss will be considerable. The electrostatic hazard is so great, so it's important to say that ESD protection is not a business, and it must be done.