Brief Overview Of Anti-static Carts

Feb 08, 2020 Leave a message

Brief overview of anti-static carts

The anti-static trolley laminates are made of carbon steel chrome-plated mesh, stainless steel mesh, and stainless steel flat plate; single-layer * with a maximum load of 200KG; pillars: optional height, diameter 25.4mm, U-shaped armrests or columns can be selected; optional: grounding Chain (enhanced antistatic effect); side net (to prevent objects from falling); clips: ABS plastic clips; each layer of wire net selects a pair of metal clips to make the antistatic conduction system more perfect, * surface resistance: 105 -108Ω, you can customize any length, width, height size and number of layers; the height of the layer can be adjusted, the standard length of the mesh * length is 1800MM, width * width is 600MM, standard flat screen can be used, and anti-net can also be used .


Professional quality to meet your highest requirements-flat and smooth, easy to maintain, wire mesh made of steel wire can be clearly seen at all angles, has no "memory effect" on heavy objects, will not deform, shockproof, abrasion, and will not produce Rust, which is not easy to be attacked by grease and most acids and alkalis, can grow according to demand. It is suitable for room separation and display of all kinds of attractive items. Use S hooks to connect supporting shelves and complete shelves to effectively use space. Each supporting shelf and optional shelf accessories are equipped with 2 S hooks. Where the S hook is used, the maximum load of the shelf is reduced to 100kg. Can be built without tools. All you need is a rubber hammer that protects the height adjustment screw. Can be moved by swivel castors with or without brakes. With casters.


The maximum load indicated in the parameters of the anti-static cart is under the state that the cargo is evenly distributed. Increasing the supporting shelf must be within the range of the maximum load bearing bracket and the large load bearing caster. Wire mesh shelf The vertical height adjustment of each step is 25mm. It is made of 4.7mm thick steel mesh (maximum load 150kg) or 62mm thick steel mesh (maximum load 200kg), three layers of nickel plating, and chrome plating on the surface. Shelf column, consisting of 2 parts with a diameter of 25mm, can be easily connected and formed with screws. Three layers of nickel plating and chrome surface. Contains nuts and height adjustment screws to compensate for uneven ground up to 20mm. The uprights between the two shelves can be connected via upright connectors. The distance between the two shelves is 15mm.