Characteristics of sticky pads and usage in various fields
The common ordinary anti-static dust sticky pad is composed of multiple layers of polyethylene film. Each layer is attached with a high-viscosity coating, which is very durable. It can quickly and effectively remove sole particles and dust and keep the working environment clean.
Before using the Hex Sticky Pad, remove the protective surface of the sticky surface from the opening on the reverse side, and then lay it flat on a clean floor without leaving any moisture. Use a shoe sole to press the sticky pad against the ground, and then remove the protective layer from the front opening for use.
If the surface of the film is covered with dust during use, remove this layer from the opening so that the next clean film can be used. Dust sticky pads are made of treated materials and are highly viscous. They are used to purify dust and dirt from shoes in clean rooms and corridors where demand is high.
The blue pedal sticky mat is non-slip and non-polluting, and will not be damaged by shoes or wheels. The new mucosa can only be used by tearing off the top layer, and does not require a mop or washing. The bottom pad adheres to the floor and is easily removed without leaving any traces. Each layer is the same size and will not be damaged or contaminated by cracks. The remaining amount is marked on the corners of the dust pad, and it is not easy to remove the upper layer and tear the pollution layer after use. When people walk on it or the wheels are on it, the dust pad will stick to any dust that attaches to the heel or even the wheels. When the sticky film of a sticky pad is covered with dust, it is peeled off and a new sticky film is used underneath, so no cleaning and washing is needed.
As the business grows and expands, we can also customize colors and sizes according to customer needs.