How to use the sticky roller to play a bigger role
The adhesive roller substrate is made of polyethylene film, designed into a roll shape, and has a pre-cut line on the mucous membrane, and the edge of the peeling roller is easily peeled off; the colloid is a polyacrylate adhesive, ensuring no degumming, and is convenient for the handle; using a PE tube The core is clean, free of contamination and prevents deformation of the drum.
To stick dust, use a sticky roller. Because it's easy to use, it quickly and efficiently removes dirt from clean room floors, walls, table tops and other surfaces. How to use a sticky roller to solve a clean room without dust? How is this problem? Let's see how to use the sticky roller.
The viscous roller is similar to the roller that coats the wall and consists of the handle of the roller. The sticky roller can not only remove dust well, but also avoid secondary pollution caused by traditional utensils such as rags, washing, broom, etc., and solve the dust-free problem in the purification workshop. How to use a sticky roller in a purification workshop? There are two points here that will allow everyone to quickly resolve the dust-free problem in the purification plant.
(1) As long as it rolls on the surface of the object to be cleaned like a painted wall, it can quickly remove fine particles, impurities, fibers, dust, etc. on the surface of various electronic products, thereby improving the quality. And the output of electronic products. It can be seen that the role of the adhesive roller is very strong, so in the production process, the matched adhesive paper is recycled, which can ensure the self-adhesiveness of the rubber wheel and prolong its service life.
(2) The viscous wheel consisting of a viscous dustproof tape and a PE core is uniformly wound around the PE core by a self-adhesive coating, and has a fixed length of pre-cut line at intervals. Replace during use; if the drum becomes dirty and no longer absorbs dirt, tear the outer contamination layer along the pre-cut line.